The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Optimization Study of Lignin Oxypropylation in View of the Preparation of Polyurethane Rigid Foams
Abstract
Four lignin samples (Alcell, Indulin AT, Curan 27-11P, and Sarkanda) were converted into liquid polyols by a chain extension reaction with propylene oxide (oxypropylation). The reaction was carried out in a batch reactor using potassium hydroxide (KOH) as the catalyst. The formulation was optimized with Alcell lignin by modifying the lignin/propylene oxide ratio [L/PO (w/v)] and catalyst content [C/(C + L) (% w/w)]. L/PO ratios of 10/90, 20/80, 30/70, and 40/60 and catalyst contents from 2% to 5% were used. The influence of the studied variables was examined by following the evolution of the hydroxyl index, viscosity, homopolymer content, and molecular weight distribution. The optimal oxypropylation conditions were established according to the requirements that a given polyol should fill when used in rigid polyurethane foam formulations, i.e., a hydroxyl index between 300 and 800 and a viscosity below 300 Pa·s. The established optimal conditions were applied to three formulations based on the other lignin samples, namely, 20/80/5, 30/70/2, and 35/65/2. The produced polyols were characterized, and the determined values for hydroxyl index and viscosity were found to be in the range of those typical of commercial polyols employed for polyurethane rigid foams.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analytical protocols for characterisation of sulphur-free lignin
Gosselink, R. J. A., Abächerli, A., Semke, H., Malherbe, R., Käuper, P., Nadif, A., & van Dam, J. E. G. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2003.10.008 · Cited by 318
Oxypropylation of Lignins and Preparation of Rigid Polyurethane Foams from the Ensuing Polyols
Nadji, H., Sillard, C., Belgacem, M. N., Benaboura, A., & Gandini, A. (2005) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500200 · Cited by 200
Self-citationYoshida, H., Mörck, R., Kringstad, K. P., & Hatakeyama, H. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070401102 · Cited by 136
Monitoring of lignin-based polyurethane synthesis by FTIR-ATR
Cateto, C. A., Barreiro, M. F., & Rodrigues, A. E. (2007) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.07.018 · Cited by 119
Self-citationWood processing and utilization
Kennedy, J. F., Phillips, G. O., Williams, P. A., Conferences, C., & 繊維学会 (1989) · E. Horwood , Halsted Press eBooks · Cited by 102
Polyurethanes from Alcell® lignin fractions obtained by sequential solvent extraction
Vanderlaan, M. N., & Thring, R. W. (1998) · Biomass and Bioenergy · doi:10.1016/s0961-9534(97)10058-7 · Cited by 89
Polyurethanes based on oxygen-organosolv lignin
Evtuguin, D. V., Andreolety, J. P., & Gandini, A. (1998) · European Polymer Journal · doi:10.1016/s0014-3057(97)00245-0 · Cited by 72
Oxypropylation of sugar beet pulp. 1. Optimisation of the reaction
Pavier, C., & Gandini, A. (2000) · Industrial Crops and Products · doi:10.1016/s0926-6690(99)00039-4 · Cited by 68
Lignins as Macromonomers for Polyesters and Polyurethanes
Gandini, A., Belgacem, M. N., Guo, Z., & Montanari, S. (2002) · Springer eBooks · doi:10.1007/978-1-4615-0643-0_4 · Cited by 64
Self-citationThe bulk oxypropylation of chitin and chitosan and the characterization of the ensuing polyols
Fernandes, S. C. M., Freire, C. S. R., Neto, C. P., & Gandini, A. (2007) · Green Chemistry · doi:10.1039/b711648a · Cited by 57
Pavier, C., & Gandini, A. (2000) · Carbohydrate Polymers · doi:10.1016/s0144-8617(99)00124-1 · Cited by 57
Urethanes and polyurethanes from oxypropylated sugar beet pulp
Pavier, C., & Gandini, A. (2000) · European Polymer Journal · doi:10.1016/s0014-3057(99)00245-1 · Cited by 57
The oxypropylation of cork residues: preliminary results
Evtyugina, M. G., Barros-Timmons, A. M., Cruz-Pinto, J. J. C., Neto, C. P., Belgacem, M. N., Pavier, C., & Gandini, A. (2000) · Bioresource Technology · doi:10.1016/s0960-8524(99)00158-3 · Cited by 41
Self-citationUrethanes and polyurethanes based on oxypropylated cork: 1. Appraisal and reactivity of products
Evtiouguina, M., Gandini, A., Neto, C. P., & Belgacem, M. N. (2001) · Polymer International · doi:10.1002/pi.760 · Cited by 37
Self-citationde Lucas, A., Rodríguez, L., Pérez‐Collado, M., Sánchez, P., & Rodríguez, J. F. (2002) · Polymer International · doi:10.1002/pi.909 · Cited by 36
Cited by
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Polyurethane types, synthesis and applications – a review
Akindoyo, J. O., Beg, M. D. H., Ghazali, S., Islam, M. R., Jeyaratnam, N., & Yuvaraj, A. R. (2016) · RSC Advances · doi:10.1039/c6ra14525f · Cited by 1,831
Lignin utilization: A review of lignin depolymerization from various aspects
Chio, C., Sain, M., & Qin, W. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.008 · Cited by 1,209
Figueiredo, P., Lintinen, K., Hirvonen, J. T., Kostiainen, M. A., & Santos, H. A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.001 · Cited by 956
A review on lignin-based polymeric, micro- and nano-structured materials
Duval, A., & Lawoko, M. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.09.017 · Cited by 733
Metadata
- Authors
- Cateto, C. A., Barreiro, M. F., Rodrigues, A. E., & Belgacem, M. N.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-02-02
- Volume
- 48
- Issue
- 5
- Pages
- 2583-2589
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2091865318
- Cited by
- 279
- References
- 15
- FWCI
- 5.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.