The DOI matches its Crossref record.
Behavior of CaTiO3/Nano-CaO as a CO2 Reactive Adsorbent
Abstract
This study focuses on the preparation of a CaTiO 3 -coated nano-CaO-based CO 2 adsorbent (CaTiO 3 /nano-CaO) for the improvement of sorption properties. The CaTiO 3 -coated nano-CaO adsorbent was prepared by forming Ti(OH) 4 from the hydrolysis of titanium alkoxide in a nano-CaCO 3 suspended solution. The resulting Ti(OH) 4 -coated nano-CaCO 3 was then heated and calcined. Test results from transmission electron microscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy show that an obvious film of TiO 2 was formed on the surface of nano-CaCO 3 after heating. X-ray diffraction analysis also showed that the nano-CaTiO 3 layer was formed at 750 °C, a calcination temperature that causes the reaction of TiO 2 with nano-CaO. The cyclic tests of reactive sorption capacity were conducted in a thermogravimetric analyzer under the following conditions: 0.02 MPa CO 2 partial pressure, carbonation temperature of 600 °C, and calcination temperature of 750 °C. Test results showed that CaTiO 3 coated onto the nano-CaO caused a significant improvement in the durability of the capacity for reactive sorption. Nano-CaO that had an optimum content of 10 wt % TiO 2 showed significantly stable CO 2 reactive sorption capacity (5.3 mol/kg) after 40 cyclic carbonation−calcination runs compared to the reactive sorption capacity of CaO without TiO 2 coating (3.7 mol/kg).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Recent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
Sun, H., Wang, J., Zhao, J., Shen, B., Shi, J., Huang, J., & Wu, C. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.11.040 · Cited by 336
Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review
Liu, W., An, H., Qin, C., Yin, J., Wang, G., Feng, B., & Xu, M. (2012) · Energy & Fuels · doi:10.1021/ef300220x · Cited by 320
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Characterization of calcium oxide derived from waste eggshell and its application as CO2 sorbent
Witoon, T. (2011) · Ceramics International · doi:10.1016/j.ceramint.2011.05.125 · Cited by 277
Metadata
- Authors
- Wu, S. F., & Zhu, Y. Q.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-02-11
- Volume
- 49
- Issue
- 6
- Pages
- 2701-2706
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2333150678
- Cited by
- 175
- References
- 0
- FWCI
- 26.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.