Microwave Pyrolysis of Wood Pellets
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The pyrolysis of wood pellets was investigated using a single-mode microwave cavity, and the dielectric properties of the wood were measured at temperatures up to 750 °C. Below 600 °C, the only microwave-absorbing phase within wood is water. This study has shown categorically that microwave pyrolysis can be achieved without the use of carbon-rich dopants and that the heating of water alone can be used to induce pyrolysis of wood. A number of potential mechanisms are discussed that relate to the power density within the heated material. The yield of bio-oil and biogas is a function of the heating rate and power density, and for the samples used in this study, a threshold power density of 5.0 × 10 8 W/m 3 was found, below which microwave pyrolysis did not occur. The results and hypotheses presented in this article represent the first steps in understanding the fundamental mechanisms of microwave pyrolysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Cited by
Kabir, G., & Hameed, B. H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.001 · Cited by 591
Kostas, E. T., Beneroso, D., & Robinson, J. P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.135 · Cited by 319
“These include sorghum [178], oil palm [179-181], Australian wood-based biomass [182], wood pellets [183], Tobacco stems [184], hay [185], switchgrass [186] and corn stover [187].”
InfluentialSelf-citationTechnical challenges in scaling up the microwave technology for biomass processing
Siddique, I. J., Salema, A. A., Antunes, E., & Vinu, R. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111767 · Cited by 189
Microwave Heating Applied to Pyrolysis
Fernandez, Y., Arenillas, A., & Angel, J. (2011) · Advances in Induction and Microwave Heating of Mineral and Organic Materials · doi:10.5772/13548 · Cited by 163
Salema, A. A., Ani, F. N., Mouris, J., & Hutcheon, R. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.06.006 · Cited by 91
Metadata
- Authors
- Robinson, J. P., Kingman, S. W., Barranco, R., Snape, C. E., & Al-Sayegh, H.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-03
- Volume
- 49
- Issue
- 2
- Pages
- 459-463
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1977386559
- Cited by
- 112
- References
- 1
- FWCI
- 3.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.