Separation of Hydrogen Mixtures by a Two-Bed Pressure Swing Adsorption Process Using Zeolite 5A
The DOI matches its Crossref record.
Abstract
A study on a two-bed six-step pressure swing adsorption (PSA) process using zeolite 5A was performed experimentally and theoretically for bulk separation of H 2 /CO and H 2 /CH 4 systems (70/30 vol %) as major components in coke oven gas. When the pressure is cycled between 1 and 11 atm at ambient temperatures, 70% H 2 in the feed could be concentrated to 99.99% in the product with a recovery of 75.87% in the H 2 /CO mixture and 80.38% in the H 2 /CH 4 mixture. The effects of adsorption pressure, P / F ratio, adsorption/purge step time, and pressure equalization step time were investigated experimentally. If the product end of an adsorption bed was not contaminated during the adsorption and depressurizing pressure equalization steps, elongation of both the adsorption and purge steps gave good adsorbent productivity and recovery without any decrease in purity. Certain elongations of step time in the pressure equalization step resulted in a better performance of a PSA process. When the H 2 mole fraction of effluent stream during the pressure equalization step was not high, the initial H 2 purity of the adsorption step was not good because of the contamination of the product end section. These results were analyzed by a mathematical model incorporating heat and momentum balances.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review of fuel cell systems for maritime applications
van Biert, L., Godjevac, M., Visser, K., & Aravind, P. V. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.007 · Cited by 624
Herm, Z. R., Swisher, J. A., Smit, B., Krishna, R., & Long, J. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja111411q · Cited by 521
Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture
Martín, C. F., Stöckel, E., Clowes, R., Adams, D. J., Cooper, A. I., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03534c · Cited by 334
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
Adsorption dynamics of a layered bed PSA for H2 recovery from coke oven gas
Yang, J., & Lee, C. (1998) · AIChE Journal · doi:10.1002/aic.690440610 · Cited by 162
Self-citationCO2 separation and landfill biogas upgrading: A comparison of 4A and 13X zeolite adsorbents
Montanari, T., Finocchio, E., Salvatore, E., Garuti, G., Giordano, A., Pistarino, C., & Busca, G. (2011) · Energy · doi:10.1016/j.energy.2010.10.038 · Cited by 145
Zhu, X., Li, S., Shi, Y., & Cai, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100784 · Cited by 129
Mivechian, A., & Pakizeh, M. (2013) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-012-0221-y · Cited by 63
Metadata
- Authors
- Yang, J., Lee, C.-H., & Chang, J.-W.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-07-01
- Volume
- 36
- Issue
- 7
- Pages
- 2789-2798
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2036742945
- Cited by
- 127
- References
- 0
- FWCI
- 1.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.