The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Modeling of Vertical Bubble-Driven Flows
Abstract
Bubbly flows comprise a large number of different flow situations, e.g., dispersed pipe flows, flows in multiphase agitated tanks, flows in multiphase fixed- and fluidized-bed reactors, and typical bubble-column and loop-reactor flows. This paper focuses on bubble-driven flows. These are flow situations were the bubble movement itself is the main source of momentum to the flow field and are often characterized by low superficial liquid velocities, relatively high superficial gas velocities, and no mechanical support of the flow (e.g., agitation). Only vertical flow situations are considered. An overview of the verified forces acting on bubbles is given, and examples of both classical and more recent modeling approaches are shown. This include gravity, buoyancy, centrifugal forces, conventional Magnus and Saffman forces, form and friction drag, and added mass as well as turbulent migration and other instability mechanisms. Special emphasis is placed on mechanisms creating bubble movement in the radial direction. Important literature on the subject with regard to the use of computational fluid dynamics to model gas-driven bubbly flows is reviewed, and the various approaches are evaluated, i.e., dynamic vs steady-state descriptions and Euler/Lagrange vs Euler/Euler formulations. Results from steady-state Euler/Euler simulations are given and discussed, and the demand for amplified modeling including more accurate and stable numerical solution schemes and algorithms is stressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Drag coefficient and relative velocity in bubbly, droplet or particulate flows
Ishii, M., & Zuber, N. (1979) · AIChE Journal · doi:10.1002/aic.690250513 · Cited by 2,031
Dynamic simulation of dispersed gas-liquid two-phase flow using a discrete bubble model
Delnoij, E., Lammers, F. A., Kuipers, J. A. M., & van Swaaij, W. P. M. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(96)00515-5 · Cited by 314
Cited by
Bubble-Size distributions and flow fields in bubble columns
Lehr, F., Millies, M., & Mewes, D. (2002) · AIChE Journal · doi:10.1002/aic.690481103 · Cited by 567
Computational flow modelling and design of bubble column reactors
Joshi, J. B. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(01)00273-1 · Cited by 391
CFD simulation of bubble column—An analysis of interphase forces and turbulence models
Tabib, M. V., Roy, S. A., & Joshi, J. B. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.09.015 · Cited by 356
Large eddy simulation of the Gas–Liquid flow in a square cross-sectioned bubble column
Deen, N. G., Solberg, T., & Hjertager, B. H. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(01)00249-4 · Cited by 341
Leifer, I., & Patro, R. K. (2002) · Continental Shelf Research · doi:10.1016/s0278-4343(02)00065-1 · Cited by 307
Metadata
- Authors
- Jakobsen, H. A., Bente H. Sannæs, Grevskott, S., & Svendsen, H. F.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-10-01
- Volume
- 36
- Issue
- 10
- Pages
- 4052-4074
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1968035821
- Cited by
- 262
- References
- 2
- FWCI
- 4.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.