Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 158

The DOI matches its Crossref record.

Limits for Air Separation by Adsorption with LiX Zeolite

Rege, Salil U., Yang, Ralph T. · 1997 · Industrial & Engineering Chemistry Research

Abstract

In the present work the performance of two zeolite sorbents, namely LiX (Al/Si = 1 with 100% Li + ) and NaX (13X), is compared for air separation by pressure swing adsorption, with particular attention focused on the limits in the adsorption/desorption pressure ratio. The product (O 2 ) recovery was optimized for the two sorbents at different pressure ratios (2−10), keeping the product purity and product throughput nearly constant. It was found that in the case of the LiX zeolite it is possible to operate at a pressure ratio as low as 2 with only a slight decrease in product recovery, compared to the limit of 4 for NaX. The temperature excursion in the LiX bed was 4 times that in the NaX bed. Substitution of a portion of the LiX sorbent by inert, high-heat-capacity particles (e.g., iron) in the bed decreased the temperature excursion significantly. It was shown that an optimal amount of 5−10% (v/v) of inert substitution (at the same total bed volume) could increase the O 2 product recovery by 2%.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ie9705214

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 158

Metadata

Authors
Rege, S. U., & Yang, R. T.
Venue
Industrial & Engineering Chemistry Research
Published
1997-12-01
Volume
36
Issue
12
Pages
5358-5365
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W1967592557
Cited by
158
References
0
FWCI
1.54
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Limits for Air Separation by Adsorption with LiX Zeolite. https://app.cochat.ai/papers/10.1021/ie9705214
The paper
Rege, S. U., & Yang, R. T. (1997). Limits for Air Separation by Adsorption with LiX Zeolite. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie9705214

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.