Preparation of Activated Carbons from Bituminous Coals with Zinc Chloride Activation
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Activated carbons were prepared by chemical activation from two Australian bituminous coals in this study. The preparation process consisted of zinc chloride impregnation followed by carbonization in nitrogen. The carbonization temperature ranges from 400 to 700 °C. Experimental results reveal that an acid-washing process following the carbonization with ZnCl 2 is necessary for preparing high-porosity carbons. Surface area, pore volume, and average pore diameter of the resulting carbons increase with the carbonization temperature to a maximum at 500 °C and then begin to decrease. The maximum values of surface area and pore volume are larger for the carbon prepared from the coal with a lower O/C atomic ratio, while earlier findings from physical activation with CO 2 have shown an opposite trend. An increase in particle size of the coal precursor leads to a reduction in porosity of the resulting carbons. The duration of the carbonization period affects the porosity of the resulting carbons, and the influence varies with the activation temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The preparation of active carbons from coal by chemical and physical activation
Ahmadpour, A., & Do, D. D. (1996) · Carbon · doi:10.1016/0008-6223(95)00204-9 · Cited by 763
Cited by
Yahya, M. A., Al-Qodah, Z., & Ngah, C. W. Z. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.02.051 · Cited by 1,202
Preparation of activated carbon from lignin by chemical activation
Hayashi, J., Kazehaya, A., Muroyama, K., & Watkinson, A. P. (2000) · Carbon · doi:10.1016/s0008-6223(00)00027-0 · Cited by 743
Fan, Q., Sun, J., Chu, L., Cui, L., Quan, G., Yan, J., Hussain, Q., & Iqbal, M. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.05.044 · Cited by 492
Dural, M. U., Cavas, L., Papageorgiou, S. K., & Katsaros, F. K. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.12.038 · Cited by 362
Novel activation process for preparing highly microporous and mesoporous activated carbons
Hu, Z., Srinivasan, M. P., & Ni, Y. (2001) · Carbon · doi:10.1016/s0008-6223(00)00198-6 · Cited by 341
Metadata
- Authors
- Teng, H., & Yeh, T.-S.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-01-01
- Volume
- 37
- Issue
- 1
- Pages
- 58-65
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2041912076
- Cited by
- 81
- References
- 1
- FWCI
- 11.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.