The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Gibbsian Surface Excess for Gas AdsorptionRevisited
Abstract
The Gibbsian surface excess (GSE) represents the true experimental variable for measuring pure and multicomponent gas adsorption equilibria and kinetics by all conventional adsorption methods (volumetric, gravimetric, chromatographic, column dynamic, total desorption, isotope exchange, etc). The GSE can be used as primary variables to formulate the general thermodynamic and kinetic models for adsorption on energetically homogeneous and heterogeneous adsorbents. Thus, practical thermodynamic properties like surface potentials, isosteric heats of adsorption of components, and heat capacities of adsorption systems can be estimated using GSE. Several thermodynamic consistency tests (differential and integral) for binary adsorption systems can also be formulated using GSE. A mathematical framework describing the isothermal and nonisothermal column dynamics for adsorption of multicomponent gas mixtures can be developed using GSE. It can be used to simulate practical process design models (pressure and thermal swing adsorption) for gas mixture separation and purification. There is no need to estimate actual amounts adsorbed from the measured GSE variables by making ambiguous assumptions about the size of the adsorbed phase. The experimental GSE can be used to completely describe all practical thermodynamic, kinetic, column dynamic, and process design aspects of gas adsorption technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rollmann, L. D., Valyocsik, E. W., & Shannon, R. D. (1984) · Inorganic Syntheses · doi:10.1002/9780470132531.ch12 · Cited by 3,373
Adsorption by Powders and Porous Solids
(1999) · Elsevier eBooks · doi:10.1016/b978-0-12-598920-6.x5000-3 · Cited by 1,819
Ehrlich, G. (1963) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(63)90031-3 · Cited by 783
Golden, T. C., & Sircar, S. (1994) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1994.1023 · Cited by 251
Self-citationIsosteric Heat of Adsorption: Theory and Experiment
Sircar, S., Mohr, R., Ristic, C., & Rao, M. B. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp9903817 · Cited by 233
Self-citationReich, R., Ziegler, W. T., & Rogers, K. A. (1980) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260075a002 · Cited by 214
Sensitivity of PSA process performance to input variables
Hartzog, D. G., & Sircar, S. (1995) · Adsorption · doi:10.1007/bf00705001 · Cited by 81
Self-citationIsotope exchange technique for measurement of gas adsorption equilibria and kinetics
Rynders, R. M., Rao, M. B., & Sircar, S. (1997) · AIChE Journal · doi:10.1002/aic.690431009 · Cited by 70
Self-citationEquilibrium adsorption of gases and liquids on heterogeneous adsorbents — A practical viewpoint
Sircar, S., & Myers, A. L. (1988) · Surface Science · doi:10.1016/0039-6028(88)90291-9 · Cited by 51
Self-citationSkin resistance for adsorbate mass transfer into extruded adsorbent pellets
Kumar, R., & Sircar, S. (1986) · Chemical Engineering Science · doi:10.1016/0009-2509(86)85071-0 · Cited by 29
Self-citationAdsorption Equilibria at High Pressures in the Helium-Nitrogen-Activated Carbon System
Fernbacher, J. M., & Wenzel, L. A. (1972) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160044a005 · Cited by 21
Low-pressure adsorption of helium on microporous solids
Springer, C., Major, C. J., & Kammermeyer, K. (1969) · Journal of Chemical & Engineering Data · doi:10.1021/je60040a017 · Cited by 20
Cited by
Hydrogen Storage in Metal–Organic Frameworks
Suh, M. P., Park, H. J., Prasad, T. K., & Lim, D.-W. (2012) · Chemical Reviews · doi:10.1021/cr200274s · Cited by 3,689
Evaluating metal–organic frameworks for natural gas storage
Mason, J. A., Veenstra, M., & Long, J. R. (2014) · Chem. Sci. · doi:10.1039/c3sc52633j · Cited by 1,239
CBM and CO2-ECBM related sorption processes in coal: A review
Busch, A., & Gensterblum, Y. (2011) · International Journal of Coal Geology · doi:10.1016/j.coal.2011.04.011 · Cited by 897
Hydrogen storage in metal–organic frameworks
Collins, D. J., & Zhou, H.-C. (2007) · Journal of Materials Chemistry · doi:10.1039/b702858j · Cited by 720
Langmuir’s Theory of Adsorption: A Centennial Review
Swenson, H., & Stadie, N. P. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00154 · Cited by 646
Metadata
- Authors
- Sircar, S.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-08-19
- Volume
- 38
- Issue
- 10
- Pages
- 3670-3682
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1965852402
- Cited by
- 264
- References
- 12
- FWCI
- 3.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.