Chitosan Sorbents for Platinum Sorption from Dilute Solutions
The DOI matches its Crossref record.
Abstract
Chitosan has proved efficient at removing platinum in dilute effluents. The maximum uptake capacity reaches 300 mg g -1 (almost 1.5 mmol g -1 ). The optimum pH for sorption is pH 2. A glutaraldehyde cross-linking pretreatment is necessary to stabilize the biopolymer in acidic solutions. Sorption isotherms have been studied as a function of pH, sorbent particle size, and the cross-linking ratio. Surprisingly, the extent of the cross-linking (determined by the concentration of the cross-linking agent in the treatment bath) has no significant influence on uptake capacity. Competitor anions such as chloride or nitrate induce a large decrease in the sorption efficiency. Sorption kinetics show also that uptake rate is not significantly changed by increasing either the cross-linking ratio or the particle size of the sorbent. Mass transfer rates are significantly affected by the initial platinum concentration and by the conditioning of the biopolymer. Gel-bead conditioning appears to reduce the sorption rate. While for molybdate and vanadate ions, mass transfer was governed by intraparticle mass transfer, for platinum, both external and intraparticle diffusion control the uptake rate. In contrast with the former ions, platinum does not form polynuclear hydrolyzed species, which are responsible for steric hindrance of diffusion into the polymer network.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment
Crini, G. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.11.002 · Cited by 2,183
Interactions of metal ions with chitosan-based sorbents: a review
Guibal, E. (2004) · Separation and Purification Technology · doi:10.1016/j.seppur.2003.10.004 · Cited by 1,850
Self-citationHeterogeneous catalysis on chitosan-based materials: A review
Guibal, E. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.12.001 · Cited by 722
Self-citationRamesh, A., Hasegawa, H., Sugimoto, W., Maki, T., & Ueda, K. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.07.008 · Cited by 519
Recovery of precious metals through biosorption — A review
Das, N. (2010) · Hydrometallurgy · doi:10.1016/j.hydromet.2010.03.016 · Cited by 508
Metadata
- Authors
- Guibal, E., Larkin, A., Vincent, T., & Tobin, J. M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-09-18
- Volume
- 38
- Issue
- 10
- Pages
- 4011-4022
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1987027610
- Cited by
- 143
- References
- 0
- FWCI
- 13.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Chitosan Sorbents for Platinum Sorption from Dilute Solutions. https://app.cochat.ai/papers/10.1021/ie990165k
- The paper
- Guibal, E., Larkin, A., Vincent, T., & Tobin, J. M. (1999). Chitosan Sorbents for Platinum Sorption from Dilute Solutions. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie990165k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.