The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Pyrolysis of Sawdust in a Conical Spouted Bed Reactor. Yields and Product Composition
Abstract
The performance of original equipment provided with a conical spouted bed reactor has been studied in flash pyrolysis of sawdust with an inert gas (N 2 ) in the 350−700 °C range and with 50 ms of average gas residence time. The effect of pyrolysis temperature on the yields of gas, liquid, and char on gas and liquid composition and on char properties has been studied. The maximum yield of liquid (corresponding to 70 wt %) is obtained at 450 °C and its composition determined by GC/MS is similar to that reported in the literature for bubbling fluidized beds. Although temperatures above 600 °C are required for the development of the char porous structure, the yield of CO 2 obtained under these conditions is unacceptable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Product compositions and kinetics in the rapid pyrolysis of milled wood lignin
Nunn, T. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a054 · Cited by 175
Cited by
Pyrolysis of biomass to produce fuels and chemical feedstocks
Yaman, S. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00177-8 · Cited by 1,224
Operating parameters for bio-oil production in biomass pyrolysis: A review
Guedes, R. E., Luna, A. S., & Torres, A. R. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.019 · Cited by 619
Ketonization of Carboxylic Acids: Mechanisms, Catalysts, and Implications for Biomass Conversion
Pham, T. N., Sooknoi, T., Crossley, S. P., & Resasco, D. E. (2013) · ACS Catalysis · doi:10.1021/cs400501h · Cited by 451
Gayubo, A. G., Aguayo, A. T., Atutxa, A., Aguado, R., & Bilbao, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030791o · Cited by 437
Self-citationGC/MS Characterization of Liquids Generated from Low-Temperature Pyrolysis of Wood
Branca, C., Giudicianni, P., & Di Blasi, C. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030066d · Cited by 405
Metadata
- Authors
- Aguado, R., Olazar, M., San José, Aguirre, G., & Bilbao, J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-04-01
- Volume
- 39
- Issue
- 6
- Pages
- 1925-1933
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1970867989
- Cited by
- 199
- References
- 1
- FWCI
- 4.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.