Effect of Surface Composition on Electronic Structure, Stability, and Electrocatalytic Properties of Pt-Transition Metal Alloys: Pt-Skin versus Pt-Skeleton Surfaces
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
The surface properties of PtM (M = Co, Ni, Fe) polycrystalline alloys are studied by utilizing Auger electron spectroscopy, low energy ion scattering spectroscopy, and ultraviolet photoemission spectroscopy. For each alloy initial surface characterization was done in an ultrahigh vacuum (UHV) system, and depending on preparation procedure it was possible to form surfaces with two different compositions. Due to surface segregation thermodynamics, annealed alloy surfaces form the outermost Pt-skin surface layer, which consists only platinum atoms, while the sputtered surfaces have the bulk ratio of alloying components. The measured valence band density of state spectra clearly shows the differences in electronic structures between Pt-skin and sputtered surfaces. Well-defined surfaces were hereafter transferred out from UHV and exposed to the acidic (electro)chemical environment. The electrochemical and post-electrochemical UHV surface characterizations revealed that Pt-skin surfaces are stable during and after immersion to an electrolyte. In contrast all sputtered surfaces formed Pt-skeleton outermost layers due to dissolution of transition metal atoms. Therefore, these three different near-surface compositions (Pt-skin, Pt-skeleton, and pure polycrystalline Pt) all having pure-Pt outermost layers are found to have different electronic structures, which originates from different arrangements of subsurface atoms of the alloying component. Modification in Pt electronic properties alters adsorption/catalytic properties of the corresponding bimetallic alloy. The most active systems for the electrochemical oxygen reduction reaction are established to be the Pt-skin near-surface composition, which also have the most shifted metallic d-band center position versus Fermi level.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Origin of the Overpotential for Oxygen Reduction at a Fuel-Cell Cathode
Nørskov, J. K., Rossmeisl, J., Logadottir, A., Lindqvist, L., Kitchin, J. R., Bligaard, T., & Jónsson, H. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047349j · Cited by 13,153
Gasteiger, H. A., Kocha, S. S., Sompalli, B., & Wagner, F. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.021 · Cited by 4,876
Advances in Electrochemistry and Electrochemical Engineering
Delahay, P., & Vijh, A. K. (1970) · Journal of The Electrochemical Society · doi:10.1149/1.2407311 · Cited by 3,063
Surface science studies of model fuel cell electrocatalysts
Markovic, N. (2002) · Surface Science Reports · doi:10.1016/s0167-5729(01)00022-x · Cited by 2,143
Self-citationKitchin, J. R., Nørskov, J. K., Barteau, M. A., & Chen, J. G. (2004) · The Journal of Chemical Physics · doi:10.1063/1.1737365 · Cited by 1,358
E LECTRONIC S TRUCTURE AND C ATALYSIS ON M ETAL S URFACES
Greeley, J., Nørskov, J. K., & Mavrikakis, M. (2002) · Annual Review of Physical Chemistry · doi:10.1146/annurev.physchem.53.100301.131630 · Cited by 993
Stamenković, V., Schmidt, T. J., Ross, P. N., & Marković, N. M. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp021182h · Cited by 829
Self-citationElectrochemical Oxygen Technology
Berg, H. (1993) · Bioelectrochemistry and Bioenergetics · doi:10.1016/0302-4598(93)80043-t · Cited by 694
Mukerjee, S., & Srinivasan, S. (1993) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(93)80380-z · Cited by 646
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Markovic, N. M., & Ross, P. N. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00349-3 · Cited by 560
Self-citationCatalysis and Electrocatalysis at Nanoparticle Surfaces
(2003) · CRC Press eBooks · doi:10.1201/9780203912713 · Cited by 559
Chemisorption and Reactivity on Supported Clusters and Thin Films
(1997) · Springer eBooks · doi:10.1007/978-94-015-8911-6 · Cited by 321
The Structure and Activity of Pt‐Co Alloys as Oxygen Reduction Electrocatalysts
Beard, B. C., & Ross, P. N. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086223 · Cited by 309
Self-citationGauthier, Y., Joly, Y., Baudoing, R., & Rundgren, J. (1985) · Physical Review B · doi:10.1103/physrevb.31.6216 · Cited by 273
Oxygen Reduction at Pt0.65Cr0.35, Pt0.2Cr0.8 and Roughened Platinum
Paffett, M. T., Beery, J. G., & Gottesfeld, S. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2096016 · Cited by 261
Kitchin, J. R., Khan, N. A., Barteau, M. A., Chen, J. G., Yakshinskiy, B., & Madey, T. E. (2003) · Surface Science · doi:10.1016/j.susc.2003.09.007 · Cited by 160
Teliska, M., Murthi, V. S., Mukerjee, S., & Ramaker, D. E. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2040949 · Cited by 151
TamizhMani, G., & Capuano, G. A. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054866 · Cited by 105
Gauthier, Y., Baudoing-Savois, R., Bugnard, J. M., Bardi, U., & Atrei, A. (1992) · Surface Science · doi:10.1016/0039-6028(92)90689-4 · Cited by 83
Investigation of the local atomic arrangement on surfaces using low-energy ion scattering
Taglauer, E. (1985) · Applied Physics A · doi:10.1007/bf00616493 · Cited by 77
The redox behaviour of compressed bismuth overlayers irreversibly adsorbed on Pt(111)
Evans, R. W., & Attard, G. A. (1993) · Journal of Electroanalytical Chemistry · doi:10.1016/0022-0728(93)80488-4 · Cited by 74
Linear Compression of α-Quartz to 150 kbar
McWhan, D. B. (1967) · Journal of Applied Physics · doi:10.1063/1.1708980 · Cited by 53
Study of the reconstructed (001) surface of the Pt80Co20 alloy
Bardi, U., Atrei, A., Zanazzi, E., Rovida, G., & Ross, P. N. (1990) · Vacuum · doi:10.1016/0042-207x(90)90382-9 · Cited by 53
Self-citationRoques, J., & Anderson, A. B. (2005) · Surface Science · doi:10.1016/j.susc.2005.02.035 · Cited by 40
Corrosion Behavior of Nickel‐Iron Alloys in Molten Carbonate
Vossen, J. P. T., Janssen, A. H. H., & de Wit, J. H. W. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836387 · Cited by 34
A first-principle study of the adsorption of 1-amino-3-cyclopentene on the (100) silicon surface
Festa, G., Cossi, M., Barone, V., Cantele, G., Ninno, D., & Iadonisi, G. (2005) · The Journal of Chemical Physics · doi:10.1063/1.1896351 · Cited by 23
Research works printed but not linked: 10
- Ross P. N., Jr., 1998, Electrocatalysis, 74
- Wang J. X., 2003, J. Electrochem. Soc., 150, A1117
- Luczak F. J., 1984, Patent 4,447,506
- Paffet M. T., 1987, J. Electrochem. Soc., 143, 58
- Paulus U. A., 2001, J. Phys. Chem. B, 106, 4191
- Stamenkovic V., 2003, J. Electroanal. Chem., 554, 199
- Watanabe M., 1994, J. Electrochem. Soc., 141, 2668
- Imahashi J., 1994, Patent 5,350,643
- Toda T., 1999, J. Electrochem. Soc., 141, 968
- Gauthier Y., 2001, Surf. Rev. Lett., 3, 1689
Cited by
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
Jiao, Y., Zheng, Y., Jaroniec, M., & Qiao, S. Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00470a · Cited by 5,388
Improved Oxygen Reduction Activity on Pt 3 Ni(111) via Increased Surface Site Availability
Stamenkovic, V. R., Fowler, B., Mun, B. S., Wang, G., Ross, P. N., Lucas, C. A., & Marković, N. M. (2007) · Science · doi:10.1126/science.1135941 · Cited by 4,421
Self-citationRecent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Alloys of platinum and early transition metals as oxygen reduction electrocatalysts
Greeley, J., Stephens, I. E. L., Bondarenko, A. S., Johansson, T. P., Hansen, H. A., Jaramillo, T. F., Rossmeisl, J., Chorkendorff, I., & Nørskov, J. K. (2009) · Nature Chemistry · doi:10.1038/nchem.367 · Cited by 3,203
“The resulting structural differences do introduce deviations from our single-crystal models, implying modest changes in ORR activit”
Background
Metadata
- Authors
- Stamenkovic, V. R., Mun, B. S., Mayrhofer, K. J. J., Ross, P. N., & Markovic, N. M.
- Affiliations
- Contribution from the Materials Science Divisoin, Argonne National Laboratory, Argonne, Illinois 60439 and Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720
- Argonne National Laboratory (US)
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-06-15
- Volume
- 128
- Issue
- 27
- Pages
- 8813-8819
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2048229801
- Cited by
- 974
- References
- 26
- Citations by year
- 2026: 20 · 2025: 28 · 2024: 37 · 2023: 24 · 2022: 37 · 2021: 40 · 2020: 45 · 2019: 63 · 2018: 74 · 2017: 76 · 2016: 71 · 2015: 75 · 2014: 74 · 2013: 53 · 2012: 73
- FWCI
- 18.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of the American Chemical Society (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Electron and X-Ray Spectroscopy Techniques
- Keywords
- Pt-Co alloy, Pt-Ni alloy, surface segregation, surface composition, electronic structure, valence band density of states, electrochemical stability, transition metal dissolution, d-band center, polycrystalline alloys
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.