The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Bithiophene-Imide-Based Polymeric Semiconductors for Field-Effect Transistors: Synthesis, Structure−Property Correlations, Charge Carrier Polarity, and Device Stability
Abstract
Developing new high-mobility polymeric semiconductors with good processability and excellent device environmental stability is essential for organic electronics. We report the synthesis, characterization, manipulation of charge carrier polarity, and device air stability of a new series of bithiophene-imide (BTI)-based polymers for organic field-effect transistors (OFETs). By increasing the conjugation length of the donor comonomer unit from monothiophene (P1) to bithiophene (P2) to tetrathiophene (P3), the electron transport capacity decreases while the hole transport capacity increases. Compared to the BTI homopolymer P(BTimR) having an electron mobility of 10(-2) cm(2) V(-1) s(-1), copolymer P1 is ambipolar with balanced hole and electron mobilities of ∼10(-4) cm(2) V(-1) s(-1), while P2 and P3 exhibit hole mobilities of ∼10(-3) and ∼10(-2) cm(2) V(-1) s(-1), respectively. The influence of P(BTimR) homopolymer M(n) on film morphology and device performance was also investigated. The high M(n) batch P(BTimR)-H affords more crystalline film microstructures; hence, 3× increased electron mobility (0.038 cm(2) V(-1) s(-1)) over the low M(n) one P(BTimR)-L (0.011 cm(2) V(-1) s(-1)). In a top-gate/bottom-contact OFET architecture, P(BTimR)-H achieves a high electron mobility of 0.14 cm(2) V(-1) s(-1), only slightly lower than that of state-of-the-art n-type polymer semiconductors. However, the high-lying P(BTimR)-H LUMO results in minimal electron transport on exposure to ambient. Copolymer P3 exhibits a hole mobility approaching 0.1 cm(2) V(-1) s(-1) in top-gate OFETs, comparable to or slightly lower than current state-of-the-art p-type polymer semiconductors (0.1-0.6 cm(2) V(-1) s(-1)). Although BTI building block incorporation does not enable air-stable n-type OFET performance for P(BTimR) or P1, it significantly increases the OFET air stability for p-type P2 and P3. Bottom-gate/top-contact and top-gate/bottom-contact P2 and P3 OFETs exhibit excellent stability in the ambient. Thus, P2 and P3 OFET hole mobilities are almost unchanged after 200 days under ambient, which is attributed to their low-lying HOMOs (>0.2 eV lower than that of P3HT), induced by the strong BTI electron-withdrawing capacity. Complementary inverters were fabricated by inkjet patterning of P(BTimR)-H (n-type) and P3b (p-type).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Cited by
Imide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Self-citationDesigning π-conjugated polymers for organic electronics
Guo, X., Baumgarten, M., & Müllen, K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.09.005 · Cited by 836
Self-citationRecent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
25th Anniversary Article: Recent Advances in n‐Type and Ambipolar Organic Field‐Effect Transistors
Zhao, Y., Guo, Y., & Liu, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302315 · Cited by 682
Donor–acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
Wu, J.-S., Cheng, S.-W., Cheng, Y.-J., & Hsu, C.-S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00250d · Cited by 629
Toward Printed Integrated Circuits based on Unipolar or Ambipolar Polymer Semiconductors
Baeg, K., Caironi, M., & Noh, Y. (2013) · Advanced Materials · doi:10.1002/adma.201205361 · Cited by 522
Self-citationInsight into High-Performance Conjugated Polymers for Organic Field-Effect Transistors
Yang, J., Zhao, Z., Wang, S., Guo, Y., & Liu, Y. (2018) · Chem · doi:10.1016/j.chempr.2018.08.005 · Cited by 462
Quinn, J. T. E., Zhu, J., Li, X., Wang, J., & Li, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc01680h · Cited by 452
Zhang, F., Hu, Y., Schuettfort, T., Di, C.-A., Gao, X., McNeill, C. R., Thomsen, L., Mannsfeld, S. C. B., Yuan, W., Sirringhaus, H., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja311469y · Cited by 413
Self-citationYuen, J. D., Fan, J., Seifter, J., Lim, B., Hufschmid, R., Heeger, A. J., & Wudl, F. (2011) · Journal of the American Chemical Society · doi:10.1021/ja205566w · Cited by 383
Isoindigo, a Versatile Electron-Deficient Unit For High-Performance Organic Electronics
Stalder, R., Mei, J., Graham, K. R., Estrada, L. A., & Reynolds, J. R. (2014) · Chemistry of Materials · doi:10.1021/cm402219v · Cited by 368
A Fluorinated Phenylene Unit as a Building Block for High‐Performance n‐Type Semiconducting Polymer
Park, J. H., Jung, E. H., Jung, J. W., & Jo, W. H. (2013) · Advanced Materials · doi:10.1002/adma.201205320 · Cited by 273
Operational Stability of Organic Field‐Effect Transistors
Bobbert, P. A., Sharma, A., Mathijssen, S. G. J., Kemerink, M., & de Leeuw, D. M. (2012) · Advanced Materials · doi:10.1002/adma.201104580 · Cited by 255
Metadata
- Authors
- Guo, X., Ortiz, R. P., Zheng, Y., Hu, Y., Noh, Y.-Y., Baeg, K.-J., Facchetti, A., & Marks, T. J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-01-05
- Volume
- 133
- Issue
- 5
- Pages
- 1405-1418
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2318443662
- Cited by
- 259
- References
- 1
- FWCI
- 21.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.