The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Polymer-Fullerene Miscibility: A Metric for Screening New Materials for High-Performance Organic Solar Cells
Abstract
The improvement of the power conversion efficiency (PCE) of polymer bulk heterojunction (BHJ) solar cells has generally been achieved through synthetic design to control frontier molecular orbital energies and molecular ordering of the electron-donating polymer. An alternate approach to control the PCE of a BHJ is to tune the miscibility of the fullerene and a semiconducting polymer by varying the structure of the fullerene. The miscibility of a series of 1,4-fullerene adducts in the semiconducting polymer, poly(3-hexylselenophene), P3HS, was measured by dynamic secondary ion mass spectrometry using a model bilayer structure. The microstructure of the bilayer was investigated using high-angle annular dark-field scanning transmission microscopy and linked to the polymer-fullerene miscibility. Finally, P3HS:fullerene BHJ solar cells were fabricated from each fullerene derivative, enabling the correlation of the active layer microstructure to the charge collection efficiency and resulting PCE of each system. The volume fraction of polymer-rich, fullerene-rich, and polymer-fullerene mixed domains can be tuned using the miscibility leading to improvement in the charge collection efficiency and PCE in P3HS:fullerene BHJ solar cells. These results suggest a rational approach to the design of fullerenes for improved BHJ solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Coffin, R. C., Peet, J., Rogers, J., & Bazan, G. C. (2009) · Nature Chemistry · doi:10.1038/nchem.403 · Cited by 597
Yiu, A. T., Beaujuge, P. M., Lee, O. P., Woo, C. H., Toney, M. F., & Fréchet, J. M. J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja2089662 · Cited by 491
Cited by
Bulk Heterojunction Solar Cells: Morphology and Performance Relationships
Huang, Y., Kramer, E. J., Heeger, A. J., & Bazan, G. C. (2014) · Chemical Reviews · doi:10.1021/cr400353v · Cited by 1,249
Self-citationRoot, S. E., Savagatrup, S., Printz, A. D., Rodriquez, D., & Lipomi, D. J. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00003 · Cited by 904
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Ye, L., Hu, H., Ghasemi, M., Wang, T., Collins, B. A., Kim, J.-H., Jiang, K., Carpenter, J. H., Li, H., Li, Z., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0005-1 · Cited by 707
Solvent Additives: Key Morphology‐Directing Agents for Solution‐Processed Organic Solar Cells
McDowell, C., Abdelsamie, M., Toney, M. F., & Bazan, G. C. (2018) · Advanced Materials · doi:10.1002/adma.201707114 · Cited by 513
Metadata
- Authors
- Treat, N. D., Varotto, A., Takacs, C. J., Batara, N., Al-Hashimi, M., Heeney, M. J., Heeger, A. J., Wudl, F., Hawker, C. J., & Chabinyc, M. L.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-09-13
- Volume
- 134
- Issue
- 38
- Pages
- 15869-15879
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2078201858
- Cited by
- 210
- References
- 2
- FWCI
- 15.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.