The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Protic Ionic Liquids and Salts as Versatile Carbon Precursors
Open accessAbstract
Instead of traditional polymer precursors and complex procedures, easily prepared and widely obtainable nitrogen-containing protic ionic liquids and salts were explored as novel, small-molecule precursors to prepare carbon materials (CMs) via direct carbonization without other treatments. Depending on the precursor structure, the resultant CMs can be readily obtained with a relative yield of up to 95.3%, a high specific surface area of up to 1380 m(2)/g, or a high N content of up to 11.1 wt%, as well as a high degree of graphitization and high conductivity (even higher than that of graphite). One of the carbons, which possesses a high surface area and a high content of pyridinic N, exhibits excellent electrocatalytic activity toward the oxygen reduction reaction in an alkaline medium, as revealed by an onset potential, half-wave potential, and kinetic current density comparable to those of commercial 20 wt% Pt/C. These low-cost and versatile precursors are expected to be important building blocks for CMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mesoporous carbon materials: Synthesis and modification
Liang, C., Li, Z., & Dai, S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702046 · Cited by 1,935
Shao, Y., Sui, J., Yin, G., & Gao, Y. (2008) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2007.09.047 · Cited by 763
Yoon, S. B., Chai, G. S., Kang, S. K., Yu, J.-S., Gierszal, K. P., & Jaroniec, M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0423466 · Cited by 271
Cited by
Liao, G., Gong, Y., Zhang, L., Gao, H., Yang, G.-J., & Fang, B. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00717b · Cited by 1,075
Ionic liquids and their solid-state analogues as materials for energy generation and storage
MacFarlane, D. R., Forsyth, M., Howlett, P. C., Kar, M., Passerini, S., Pringle, J. M., Ohno, H., Watanabe, M., Yan, F., Zheng, W., et al. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.5 · Cited by 666
Self-citationIonic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Hugar, K. M., Kostalik, H. A., & Coates, G. W. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b02879 · Cited by 465
Gao, J., Wang, Y., Wu, H., Liu, X., Wang, L., Yu, Q., Li, A., Wang, H., Song, C., Gao, Z., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201907915 · Cited by 359
Metal nanoparticles supported on two-dimensional graphenes as heterogeneous catalysts
Navalon, S., Dhakshinamoorthy, A., Alvaro, M., & Garcia, H. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.12.005 · Cited by 323
Activated carbon as catalyst support: precursors, preparation, modification and characterization
Iwanow, M., Gärtner, T., Sieber, V., & König, B. (2020) · Beilstein Journal of Organic Chemistry · doi:10.3762/bjoc.16.104 · Cited by 229
Zhang, H., Liu, X., He, G., Zhang, X., Bao, S., & Hu, W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.016 · Cited by 127
Chen, X., Gao, H., Xing, L., Dong, W., Li, A., Cheng, P., Liu, P., & Wang, G. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.08.024 · Cited by 128
Tailoring the textural properties of hierarchical porous carbons using deep eutectic solvents
López-Salas, N., Carriazo, D., Gutiérrez, M. C., Ferrer, M. L., Ania, C. O., Rubio, F., Tamayo, A., Fierro, J. L. G., & del Monte, F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02704k · Cited by 46
Metadata
- Authors
- Zhang, S., Miran, M. S., Ikoma, A., Dokko, K., & Watanabe, M.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-23
- Volume
- 136
- Issue
- 5
- Pages
- 1690-1693
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2314728146
- Cited by
- 227
- References
- 3
- FWCI
- 11.57
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
