The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Layer-by-Layer Assembly of All Carbon Nanotube Ultrathin Films for Electrochemical Applications
Abstract
All multiwall carbon nanotube (MWNT) thin films are created by layer-by-layer (LBL) assembly of surface functionalized MWNTs. Negatively and positively charged MWNTs were prepared by surface functionalization, allowing the incorporation of MWNTs into highly tunable thin films via the LBL technique. The pH dependent surface charge on the MWNTs gives this system the unique characteristics of LBL assembly of weak polyelectrolytes, controlling thickness and morphology with assembly pH conditions. We demonstrate that these MWNT thin films have randomly oriented interpenetrating network structure with well developed nanopores using AFM and SEM, which is an ideal structure of functional materials for various applications. In particular, electrochemical measurements of these all-MWNT thin film electrodes show high electronic conductivity in comparison with polymer composites with single wall nanotubes, and high capacitive behavior with precise control of capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Noncovalent sidewall functionalization of single-walled carbon nanotubes for protein immobilization
Chen, R. J., Zhang, Y., Wang, D., & Dai, H. (2001) · Journal of the American Chemical Society · doi:10.1021/ja010172b · Cited by 2,534
Cited by
Georgakilas, V., Perman, J. A., Tucek, J., & Zboril, R. (2015) · Chemical Reviews · doi:10.1021/cr500304f · Cited by 2,147
Nanoporous metal/oxide hybrid electrodes for electrochemical supercapacitors
Lang, X., Hirata, A., Fujita, T., & Chen, M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.13 · Cited by 2,109
Wang, Q., Yan, J., & Fan, Z. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03109e · Cited by 1,225
Electrocatalytic Oxygen Evolution at Surface-Oxidized Multiwall Carbon Nanotubes
Lu, X., Yim, W.-L., Suryanto, B. H. R., & Zhao, C. (2015) · Journal of the American Chemical Society · doi:10.1021/ja509879r · Cited by 594
On the Configuration of Supercapacitors for Maximizing Electrochemical Performance
Zhang, J., & Zhao, X. S. (2012) · ChemSusChem · doi:10.1002/cssc.201100571 · Cited by 527
Metadata
- Authors
- Lee, S. W., Kim, B.-S., Chen, S., Shao-Horn, Y., & Hammond, P. T.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-23
- Volume
- 131
- Issue
- 2
- Pages
- 671-679
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2064394331
- Cited by
- 648
- References
- 1
- FWCI
- 21.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
