Optimizing Active Sites for High CO Selectivity during CO2 Hydrogenation over Supported Nickel Catalysts
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Controlling the selectivity of CO 2 hydrogenation catalysts is a fundamental challenge. In this study, the selectivity of supported Ni catalysts prepared by the traditional impregnation method was found to change after a first CO 2 hydrogenation reaction cycle from 100 to 800 °C. The usually high CH 4 formation was suppressed leading to full selectivity toward CO. This behavior was also observed after the catalyst was treated under methane or propane atmospheres at elevated temperatures. In situ spectroscopic studies revealed that the accumulation of carbon species on the catalyst surface at high temperatures leads to a nickel carbide-like phase. The catalyst regains its high selectivity to CH 4 production after carbon depletion from the surface of the Ni particles by oxidation. However, the selectivity readily shifts back toward CO formation after exposing the catalysts to a new temperature-programmed CO 2 hydrogenation cycle. The fraction of weakly adsorbed CO species increases on the carbide-like surface when compared to a clean nickel surface, explaining the higher selectivity to CO. This easy protocol of changing the surface of a common Ni catalyst to gain selectivity represents an important step for the commercial use of CO 2 hydrogenation to CO processes toward high-added-value products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vitos, L., Ruban, A. V., Skriver, H. L., & Kollár, J. (1998) · Surface Science · doi:10.1016/s0039-6028(98)00363-x · Cited by 2,768
Closing the loop: captured CO 2 as a feedstock in the chemical industry
Otto, A., Grube, T., Schiebahn, S., & Stolten, D. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02591e · Cited by 482
Cited by
Ni, Z., Chen, X., Su, L., Shen, H., Jiang, Y., Feng, C., & Yin, C. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c05105 · Cited by 10
Metadata
- Authors
- Galhardo, T. S., Braga, A. H., Arpini, B. H., Szanyi, J., Gonçalves, R. V., Zornio, B. F., Miranda, C. R., & Rossi, L. M.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-03-04
- Volume
- 143
- Issue
- 11
- Pages
- 4268-4280
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3135364891
- Cited by
- 235
- References
- 2
- FWCI
- 6.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimizing Active Sites for High CO Selectivity during CO2 Hydrogenation over Supported Nickel Catalysts. https://app.cochat.ai/papers/10.1021/jacs.0c12689
- The paper
- Galhardo, T. S., Braga, A. H., Arpini, B. H., Szanyi, J., Gonçalves, R. V., Zornio, B. F., Miranda, C. R., & Rossi, L. M. (2021). Optimizing Active Sites for High CO Selectivity during CO2 Hydrogenation over Supported Nickel Catalysts. Journal of the American Chemical Society. https://doi.org/10.1021/jacs.0c12689
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.