The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
One-Step Synthesis of SnI2·(DMSO)x Adducts for High-Performance Tin Perovskite Solar Cells
Abstract
Contemporary thin-film photovoltaic (PV) materials contain elements that are scarce (CIGS) or regulated (CdTe and lead-based perovskites), a fact that may limit the widespread impact of these emerging PV technologies. Tin halide perovskites utilize materials less stringently regulated than the lead (Pb) employed in mainstream perovskite solar cells; however, even today’s best tin-halide perovskite thin films suffer from limited carrier diffusion length and poor film morphology. We devised a synthetic route to enable in situ reaction between metallic Sn and I 2 in dimethyl sulfoxide (DMSO), a reaction that generates a highly coordinated SnI 2 ·(DMSO) x adduct that is well-dispersed in the precursor solution. The adduct directs out-of-plane crystal orientation and achieves a more homogeneous structure in polycrystalline perovskite thin films. This approach improves the electron diffusion length of tin-halide perovskite to 290 ± 20 nm compared to 210 ± 20 nm in reference films. We fabricate tin-halide perovskite solar cells with a power conversion efficiency of 14.6% as certified in an independent lab. This represents a ∼20% increase compared to the previous best-performing certified tin-halide perovskite solar cells. The cells outperform prior earth-abundant and heavy-metal-free inorganic-active-layer-based thin-film solar cells such as those based on amorphous silicon, Cu 2 ZnSn(S/Se) 4, and Sb 2 (S/Se) 3 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Self-citationRelativistic GW calculations on CH3NH3PbI3 and CH3NH3SnI3 Perovskites for Solar Cell Applications
Umari, P., Mosconi, E., & De Angelis, F. (2014) · Scientific Reports · doi:10.1038/srep04467 · Cited by 1,325
Prospects for low-toxicity lead-free perovskite solar cells
Ke, W., & Kanatzidis, M. G. (2019) · Nature Communications · doi:10.1038/s41467-019-08918-3 · Cited by 1,137
Lin, R., Xiao, K., Qin, Z., Han, Q., Zhang, C., Wei, M., Saidaminov, M. I., Gao, Y., Xu, J., Xiao, M., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0466-3 · Cited by 1,073
Self-citationLewis Acid–Base Adduct Approach for High Efficiency Perovskite Solar Cells
Lee, J.-W., Kim, H.-S., & Park, N.-G. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00440 · Cited by 1,067
Hao, F., Stoumpos, C. C., Guo, P., Zhou, N., Marks, T. J., Chang, R. P. H., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06658 · Cited by 759
Umari, P., Mosconi, E., & Angelis, F. D. (2013) · arXiv (Cornell University) · doi:10.48550/arxiv.1309.4895 · Cited by 759
Efficient Visible Quasi‐2D Perovskite Light‐Emitting Diodes
Byun, J., Cho, H., Wolf, C., Jang, M., Sadhanala, A., Friend, R. H., Yang, H., & Lee, T. (2016) · Advanced Materials · doi:10.1002/adma.201601369 · Cited by 655
Jiang, X., Wang, F., Wei, Q., Li, H., Shang, Y., Zhou, W., Wang, C., Cheng, P., Chen, Q., Chen, L., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15078-2 · Cited by 625
Self-citation“Unleaded” Perovskites: Status Quo and Future Prospects of Tin‐Based Perovskite Solar Cells
Ke, W., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Advanced Materials · doi:10.1002/adma.201803230 · Cited by 533
Antioxidant Grain Passivation for Air‐Stable Tin‐Based Perovskite Solar Cells
Tai, Q., Guo, X., Tang, G., You, P., Ng, T., Shen, D., Cao, J., Liu, C., Wang, N., Zhu, Y., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201811539 · Cited by 505
Lead-free tin-halide perovskite solar cells with 13% efficiency
Nishimura, K., Kamarudin, M. A., Hirotani, D., Hamada, K., Shen, Q., Iikubo, S., Minemoto, T., Yoshino, K., & Hayase, S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104858 · Cited by 502
Perovskite solar cells: film formation and properties
Song, T.-B., Chen, Q., Zhou, H., Jiang, C., Wang, H.-H., (Michael) Yang, Y., Liu, Y., You, J., & Yang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05246c · Cited by 483
Perovskite Solar Cells Go Lead Free
Abate, A. (2017) · Joule · doi:10.1016/j.joule.2017.09.007 · Cited by 425
Carrier Diffusion Lengths of over 500 nm in Lead-Free Perovskite CH3NH3SnI3 Films
Ma, L., Hao, F., Stoumpos, C. C., Phelan, B. T., Wasielewski, M. R., & Kanatzidis, M. G. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09257 · Cited by 327
Surface-Controlled Oriented Growth of FASnI3 Crystals for Efficient Lead-free Perovskite Solar Cells
Meng, X., Wang, Y., Lin, J., Liu, X., He, X., Barbaud, J., Wu, T., Noda, T., Yang, X., & Han, L. (2020) · Joule · doi:10.1016/j.joule.2020.03.007 · Cited by 319
Phase Transition Control for High Performance Ruddlesden–Popper Perovskite Solar Cells
Zhang, X., Munir, R., Xu, Z., Liu, Y., Tsai, H., Nie, W., Li, J., Niu, T., Smilgies, D., Kanatzidis, M. G., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707166 · Cited by 294
Nakamura, T., Yakumaru, S., Truong, M. A., Kim, K., Liu, J., Hu, S., Otsuka, K., Hashimoto, R., Murdey, R., Sasamori, T., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16726-3 · Cited by 293
Gu, F., Ye, S., Zhao, Z., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2018) · Solar RRL · doi:10.1002/solr.201800136 · Cited by 275
A Realistic Methodology for 30% Efficient Perovskite Solar Cells
Ma, C., & Park, N.-G. (2020) · Chem · doi:10.1016/j.chempr.2020.04.013 · Cited by 247
Templated growth of FASnI3 crystals for efficient tin perovskite solar cells
Liu, X., Wu, T., Chen, J.-Y., Meng, X., He, X., Noda, T., Chen, H., Yang, X., Segawa, H., Wang, Y., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01845g · Cited by 237
Templated growth of oriented layered hybrid perovskites on 3D-like perovskites
Wang, J., Luo, S., Lin, Y., Chen, Y., Deng, Y., Li, Z., Meng, K., Chen, G., Huang, T., Xiao, S., et al. (2020) · Nature Communications · doi:10.1038/s41467-019-13856-1 · Cited by 231
Wang, C., Zhang, Y., Gu, F., Zhao, Z., Li, H., Jiang, H., Bian, Z., & Liu, Z. (2021) · Matter · doi:10.1016/j.matt.2020.11.012 · Cited by 226
Self-citationEfficient and stable tin-based perovskite solar cells by introducing π-conjugated Lewis base
Wu, T., Liu, X., He, X., Wang, Y., Meng, X., Noda, T., Yang, X., & Han, L. (2020) · Science China Chemistry · doi:10.1007/s11426-019-9653-8 · Cited by 213
Tin Halide Perovskites Going Forward: Frost Diagrams Offer Hints
Awais, M., Kirsch, R. L., Yeddu, V., & Saidaminov, M. I. (2021) · ACS Materials Letters · doi:10.1021/acsmaterialslett.0c00571 · Cited by 161
Engineering Halide Perovskite Crystals through Precursor Chemistry
Li, B., Binks, D. J., Cao, G., & Tian, J. (2019) · Small · doi:10.1002/smll.201903613 · Cited by 135
Yan, Y., Pullerits, T., Zheng, K., & Liang, Z. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00577 · Cited by 84
Dimensionality engineering of metal halide perovskites
Kahwagi, R. F., Thornton, S. T., Smith, B., & Koleilat, G. I. (2020) · Frontiers of Optoelectronics · doi:10.1007/s12200-020-1039-6 · Cited by 45
Cited by
Rationalization of passivation strategies toward high-performance perovskite solar cells
Zhang, Z., Qiao, L., Meng, K., Long, R., Chen, G., & Gao, P. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00217e · Cited by 357
Tautomeric mixture coordination enables efficient lead-free perovskite LEDs
Han, D., Wang, J., Agosta, L., Zang, Z., Zhao, B., Kong, L., Lu, H., Mosquera-Lois, I., Carnevali, V., Dong, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06514-6 · Cited by 280
Self-citationAdvanced Organic–Inorganic Hybrid Materials for Optoelectronic Applications
Zhou, K., Qi, B., Liu, Z., Wang, X., Sun, Y., & Zhang, L. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202411671 · Cited by 228
Myung, C. W., Hajibabaei, A., Cha, J., Ha, M., Kim, J., & Kim, K. S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202279 · Cited by 54
Sajid, S., Alzahmi, S., Salem, I. B., Park, J., & Obaidat, I. M. (2023) · Nanomaterials · doi:10.3390/nano13060983 · Cited by 31
Metadata
- Authors
- Jiang, X., Li, H., Zhou, Q., Wei, Q., Wei, M., Jiang, L., Wang, Z., Peng, Z., Wang, F., Zang, Z., Xu, K., Hou, Y., Teale, S., Zhou, W., Si, R., Gao, X., Sargent, E. H., & Ning, Z.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-07-01
- Volume
- 143
- Issue
- 29
- Pages
- 10970-10976
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3173782370
- Cited by
- 498
- References
- 33
- FWCI
- 26.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.