The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Optimizing Hydrogen Storage in MOFs through Engineering of Crystal Morphology and Control of Crystal Size
Abstract
Metal-organic frameworks (MOFs) are promising materials for hydrogen storage that fail to achieve expected theoretical values of volumetric storage density due to poor powder packing. A strategy that improves packing efficiency and volumetric hydrogen gas storage density dramatically through engineered morphologies and controlled-crystal size distributions is presented that holds promise for maximizing storage capacity for a given MOF. The packing density improvement, demonstrated for the benchmark sorbent MOF-5, leads to a significant enhancement of volumetric hydrogen storage performance relative to commercial MOF-5. System model projections demonstrate that engineering of crystal morphology/size or use of a bimodal distribution of cubic crystal sizes in tandem with system optimization can surpass the 25 g/L volumetric capacity of a typical 700 bar compressed storage system and exceed the DOE targets 2020 volumetric capacity (30 g/L). Finally, a critical link between improved powder packing density and reduced damage upon compaction is revealed leading to sorbents with both high surface area and high density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2017) · doi:10.1016/j.ijhydene.2016.03.178 · Cited by 1,216
Cited by
Morphology control through the synthesis of metal-organic frameworks
Łuczak, J., Kroczewska, M., Baluk, M., Sowik, J., Mazierski, P., & Zaleska-Medynska, A. (2023) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2023.102864 · Cited by 406
Metal-organic-framework-based materials as platforms for energy applications
Wang, W., Chen, D., Li, F., Xiao, X., & Xu, Q. (2024) · Chem · doi:10.1016/j.chempr.2023.09.009 · Cited by 370
Progress and potential of metal-organic frameworks (MOFs) for gas storage and separation: A review
Jia, T., Gu, Y., & Li, F. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108300 · Cited by 356
Muhammed, N. S., Gbadamosi, A. O., Epelle, E. I., Abdulrasheed, A. A., Haq, B., Patil, S., Al-Shehri, D., & Kamal, M. S. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109207 · Cited by 307
Recent Progress Using Solid-State Materials for Hydrogen Storage: A Short Review
Lee, S.-Y., Lee, J.-H., Kim, Y.-H., Kim, J.-W., Lee, K.-J., & Park, S.-J. (2022) · Processes · doi:10.3390/pr10020304 · Cited by 229
Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity
Madden, D. G., O’Nolan, D., Rampal, N., Babu, R., Çamur, C., Al Shakhs, A. N., Zhang, S.-Y., Rance, G. A., Perez, J., Maria Casati, N. P., et al. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c04608 · Cited by 123
Metadata
- Authors
- Suresh, K., Aulakh, D., Purewal, J., Siegel, D. J., Veenstra, M., & Matzger, A. J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-07-09
- Volume
- 143
- Issue
- 28
- Pages
- 10727-10734
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W3177550409
- Cited by
- 217
- References
- 1
- FWCI
- 11.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.