The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Codoping in SnTe: Enhancement of Thermoelectric Performance through Synergy of Resonance Levels and Band Convergence
Abstract
We report a significant enhancement of the thermoelectric performance of p-type SnTe over a broad temperature plateau with a peak ZT value of ∼1.4 at 923 K through In/Cd codoping and a CdS nanostructuring approach. Indium and cadmium play different but complementary roles in modifying the valence band structure of SnTe. Specifically, In-doping introduces resonant levels inside the valence bands, leading to a considerably improved Seebeck coefficient at low temperature. Cd-doping, however, increases the Seebeck coefficient of SnTe remarkably in the mid- to high-temperature region via a convergence of the light and heavy hole bands and an enlargement of the band gap. Combining the two dopants in SnTe yields enhanced Seebeck coefficient and power factor over a wide temperature range due to the synergy of resonance levels and valence band convergence, as demonstrated by the Pisarenko plot and supported by first-principles band structure calculations. Moreover, these codoped samples can be hierarchically structured on all scales (atomic point defects by doping, nanoscale precipitations by CdS nanostructuring, and mesoscale grains by SPS treatment) to achieve highly effective phonon scattering leading to strongly reduced thermal conductivities. In addition to the high maximum ZT the resultant large average ZT of ∼0.8 between 300 and 923 K makes SnTe an attractive p-type material for high-temperature thermoelectric power generation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals
Zhao, L.-D., Lo, S.-H., Zhang, Y., Sun, H., Tan, G., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G. (2014) · Nature · doi:10.1038/nature13184 · Cited by 5,218
Self-citationHigh-performance bulk thermoelectrics with all-scale hierarchical architectures
Biswas, K., He, J., Blum, I. D., Wu, C.-I., Hogan, T. P., Seidman, D. N., Dravid, V. P., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11439 · Cited by 4,740
Self-citationConvergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Enhancement of Thermoelectric Efficiency in PbTe by Distortion of the Electronic Density of States
Heremans, J. P., Jovovic, V., Toberer, E. S., Saramat, A., Kurosaki, K., Charoenphakdee, A., Yamanaka, S., & Snyder, G. J. (2008) · Science · doi:10.1126/science.1159725 · Cited by 4,161
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Self-citationLower limit to the thermal conductivity of disordered crystals
Cahill, D. G., Watson, S. K., & Pohl, R. O. (1992) · Physical Review B · doi:10.1103/physrevb.46.6131 · Cited by 2,617
Cited by
Advances in thermoelectric materials research: Looking back and moving forward
He, J., & Tritt, T. M. (2017) · Science · doi:10.1126/science.aak9997 · Cited by 2,767
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Self-citationHigh Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
High thermoelectric performance in low-cost SnS 0.91 Se 0.09 crystals
He, W., Wang, D., Wu, H., Xiao, Y., Zhang, Y., He, D., Feng, Y., Hao, Y.-J., Dong, J.-F., Chetty, R., et al. (2019) · Science · doi:10.1126/science.aax5123 · Cited by 610
Self-citationSnSe: a remarkable new thermoelectric material
Zhao, L.-D., Chang, C., Tan, G., & Kanatzidis, M. G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01755j · Cited by 573
Self-citationYang, J., Xi, L., Qiu, W., Wu, L., Shi, X., Chen, L., Yang, J., Zhang, W., Uher, C., & Singh, D. J. (2016) · npj Computational Materials · doi:10.1038/npjcompumats.2015.15 · Cited by 552
Self-citationLi, W., Zheng, L., Ge, B., Lin, S., Zhang, X., Chen, Z., Chang, Y., & Pei, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605887 · Cited by 432
Eco‐Friendly SnTe Thermoelectric Materials: Progress and Future Challenges
Moshwan, R., Yang, L., Zou, J., & Chen, Z. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703278 · Cited by 424
Routes for high-performance thermoelectric materials
Zhou, X., Yan, Y., Lu, X., Zhu, H., Han, X., Chen, G., & Ren, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.039 · Cited by 393
Wu, H., Chang, C., Feng, D., Xiao, Y., Zhang, X., Pei, Y., Zheng, L., Wu, D., Gong, S., Chen, Y., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02423d · Cited by 325
Self-citationInterstitial Point Defect Scattering Contributing to High Thermoelectric Performance in SnTe
Pei, Y., Zheng, L., Li, W., Lin, S., Chen, Z., Wang, Y., Xu, X., Yu, H., Chen, Y., & Ge, B. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600019 · Cited by 306
Banik, A., Vishal, B., Perumal, S., Datta, R., & Biswas, K. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00728g · Cited by 296
Thermoelectric GeTe with Diverse Degrees of Freedom Having Secured Superhigh Performance
Hong, M., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807071 · Cited by 291
Chalcogenide Thermoelectrics Empowered by an Unconventional Bonding Mechanism
Yu, Y., Cagnoni, M., Cojocaru‐Mirédin, O., & Wuttig, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904862 · Cited by 272
Hu, L., Zhang, Y., Wu, H., Li, J., Li, Y., Mckenna, M., He, J., Liu, F., Pennycook, S. J., & Zeng, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802116 · Cited by 266
Su, H., Lei, S., Chen, Y., Lv, Y., & Zhang, Q. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c16158 · Cited by 4
Metadata
- Authors
- Tan, G., Shi, F., Hao, S., Chi, H., Zhao, L.-D., Uher, C., Wolverton, C., Dravid, V. P., & Kanatzidis, M. G.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-09
- Volume
- 137
- Issue
- 15
- Pages
- 5100-5112
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2327409671
- Cited by
- 502
- References
- 38
- FWCI
- 17.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.