The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Toward High Performance n-Type Thermoelectric Materials by Rational Modification of BDPPV Backbones
Abstract
Three n-type polymers BDPPV, ClBDPPV, and FBDPPV which exhibit outstanding electrical conductivities when mixed with an n-type dopant, N-DMBI ((4-(1,3-dimethyl-2,3-dihydro-1H-benzoimidazol-2-yl)phenyl)dimethylamine), in solution. High electron mobility and an efficient doping process endow FBDPPV with the highest electrical conductivities of 14 S cm(-1) and power factors up to 28 μW m(-1) K(-2), which is the highest thermoelectric (TE) power factor that has been reported for solution processable n-type conjugated polymers. Our investigations reveal that introduction of halogen atoms to the polymer backbones has a dramatic influence on not only the electron mobilities but also the doping levels, both of which are critical to the electrical conductivities. This work suggests the significance of rational modification of polymer structures and opens the gate for applying the rapidly developed organic semiconductors with high carrier mobilities to thermoelectric field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bubnova, O., Khan, Z. U., Malti, A., Braun, S., Fahlman, M., Berggren, M., & Crispin, X. (2011) · Nature Materials · doi:10.1038/nmat3012 · Cited by 1,769
Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P. (2013) · Nature Materials · doi:10.1038/nmat3635 · Cited by 1,688
Highly Efficient Organic Devices Based on Electrically Doped Transport Layers
Walzer, K., Maennig, B., Pfeiffer, M., & Leo, K. (2007) · Chemical Reviews · doi:10.1021/cr050156n · Cited by 1,560
Zhang, Q., Sun, Y., Xu, W., & Zhu, D. (2014) · Advanced Materials · doi:10.1002/adma.201305371 · Cited by 999
Self-citationTowards polymer-based organic thermoelectric generators
Bubnova, O., & Crispin, X. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22777k · Cited by 808
25th Anniversary Article: Recent Advances in n‐Type and Ambipolar Organic Field‐Effect Transistors
Zhao, Y., Guo, Y., & Liu, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302315 · Cited by 682
Sun, Y., Sheng, P., Di, C., Jiao, F., Xu, W., Qiu, D., & Zhu, D. (2012) · Advanced Materials · doi:10.1002/adma.201104305 · Cited by 532
Self-citationWei, P., Oh, J. H., Dong, G., & Bao, Z. (2010) · Journal of the American Chemical Society · doi:10.1021/ja103173m · Cited by 419
Schlitz, R. A., Brunetti, F. G., Glaudell, A. M., Miller, P. L., Brady, M. A., Takacs, C. J., Hawker, C. J., & Chabinyc, M. L. (2014) · Advanced Materials · doi:10.1002/adma.201304866 · Cited by 405
Lei, T., Xia, X., Wang, J.-Y., Liu, C.-J., & Pei, J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412533d · Cited by 347
Self-citation
Cited by
Organic thermoelectric materials for energy harvesting and temperature control
Russ, B., Glaudell, A., Urban, J. J., Chabinyc, M. L., & Segalman, R. A. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.50 · Cited by 1,296
Smart Textile‐Integrated Microelectronic Systems for Wearable Applications
Shi, J., Liu, S., Zhang, L., Yang, B., Shu, L., Yang, Y., Ren, M., Wang, Y., Chen, J., Chen, W., et al. (2020) · Advanced Materials · doi:10.1002/adma.201901958 · Cited by 822
Flexible Thermoelectric Materials and Generators: Challenges and Innovations
Wang, Y., Yang, L., Shi, X., Shi, X., Chen, L., Dargusch, M. S., Zou, J., & Chen, Z. (2019) · Advanced Materials · doi:10.1002/adma.201807916 · Cited by 751
Carbon‐Nanotube‐Based Thermoelectric Materials and Devices
Blackburn, J. L., Ferguson, A. J., Cho, C., & Grunlan, J. C. (2018) · Advanced Materials · doi:10.1002/adma.201704386 · Cited by 684
Flexible thermoelectric materials and device optimization for wearable energy harvesting
Bahk, J.-H., Fang, H., Yazawa, K., & Shakouri, A. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01644d · Cited by 621
Thermoelectrics: From history, a window to the future
Beretta, D., Neophytou, N., Hodges, J. M., Kanatzidis, M. G., Narducci, D., Martin- Gonzalez, M., Beekman, M., Balke, B., Cerretti, G., Tremel, W., et al. (2019) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.09.001 · Cited by 606
Wearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems
Jia, Y., Jiang, Q., Sun, H., Liu, P., Hu, D., Pei, Y., Liu, W., Crispin, X., Fabiano, S., Ma, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102990 · Cited by 600
Thermoelectric plastics: from design to synthesis, processing and structure–property relationships
Kroon, R., Mengistie, D. A., Kiefer, D., Hynynen, J., Ryan, J. D., Yu, L., & Müller, C. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00149a · Cited by 577
Thermoelectric materials and applications for energy harvesting power generation
Petsagkourakis, I., Tybrandt, K., Crispin, X., Ohkubo, I., Satoh, N., & Mori, T. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1530938 · Cited by 570
Flexible thermoelectric materials and devices
Du, Y., Xu, J., Paul, B., & Eklund, P. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.07.004 · Cited by 567
Polymer Semiconductors: Synthesis, Processing, and Applications
Ding, L., Yu, Z.-D., Wang, X.-Y., Yao, Z.-F., Lu, Y., Yang, C.-Y., Wang, J.-Y., & Pei, J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00696 · Cited by 539
Self-citationRecent advances in high-performance bulk thermoelectric materials
Shi, X., Chen, L., & Uher, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1183075 · Cited by 494
Doping Approaches for Organic Semiconductors
Scaccabarozzi, A. D., Basu, A., Aniés, F., Liu, J., Zapata-Arteaga, O., Warren, R., Firdaus, Y., Nugraha, M. I., Lin, Y., Campoy-Quiles, M., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00581 · Cited by 468
Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications
Massetti, M., Jiao, F., Ferguson, A. J., Zhao, D., Wijeratne, K., Würger, A., Blackburn, J. L., Crispin, X., & Fabiano, S. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00218 · Cited by 456
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
High-Performance n-Type Polymer Semiconductors: Applications, Recent Development, and Challenges
Sun, H., Guo, X., & Facchetti, A. (2020) · Chem · doi:10.1016/j.chempr.2020.05.012 · Cited by 390
A practical field guide to thermoelectrics: Fundamentals, synthesis, and characterization
Zevalkink, A., Smiadak, D. M., Blackburn, J. L., Ferguson, A. J., Chabinyc, M. L., Delaire, O., Wang, J., Kovnir, K., Martin, J., Schelhas, L. T., et al. (2018) · Applied Physics Reviews · doi:10.1063/1.5021094 · Cited by 323
Self-citationThermoelectric Properties of Solution‐Processed n‐Doped Ladder‐Type Conducting Polymers
Wang, S., Sun, H., Ail, U., Vagin, M., Persson, P. O. Å., Andreasen, J. W., Thiel, W., Berggren, M., Crispin, X., Fazzi, D., et al. (2016) · Advanced Materials · doi:10.1002/adma.201603731 · Cited by 313
Enhancing Molecular n‐Type Doping of Donor–Acceptor Copolymers by Tailoring Side Chains
Liu, J., Qiu, L., Alessandri, R., Qiu, X., Portale, G., Dong, J., Talsma, W., Ye, G., Sengrian, A. A., Souza, P. C. T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704630 · Cited by 310
Simple Salt‐Coordinated n‐Type Nanocarbon Materials Stable in Air
Nonoguchi, Y., Nakano, M., Murayama, T., Hagino, H., Hama, S., Miyazaki, K., Matsubara, R., Nakamura, M., & Kawai, T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600179 · Cited by 305
Zhang, Y., Wang, Y., Gao, C., Ni, Z., Zhang, X., Hu, W., & Dong, H. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00720g · Cited by 293
Recent Development of Thermoelectric Polymers and Composites
Yao, H., Fan, Z., Cheng, H., Guan, X., Wang, C., Sun, K., & Ouyang, J. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700727 · Cited by 291
Prunet, G., Pawula, F., Fleury, G., Cloutet, E., Robinson, A. J., Hadziioannou, G., & Pakdel, A. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100402 · Cited by 286
Kiefer, D., Giovannitti, A., Sun, H., Biskup, T., Hofmann, A., Koopmans, M., Cendra, C., Weber, S., Anton Koster, L. J., Olsson, E., et al. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01146 · Cited by 275
Yan, X., Xiong, M., Li, J.-T., Zhang, S., Chase, Z. A., Lu, Y., Wang, Z.-Y., Yao, Z.-F., Wang, J.-Y., Gu, X., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b10107 · Cited by 268
Self-citationHuang, D., Yao, H., Cui, Y., Zou, Y., Zhang, F., Wang, C., Shen, H., Jin, W., Zhu, J., Diao, Y., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05344 · Cited by 267
Self-citationKroon, R., Kiefer, D., Stegerer, D., Yu, L., Sommer, M., & Müller, C. (2017) · Advanced Materials · doi:10.1002/adma.201700930 · Cited by 266
Metadata
- Authors
- Shi, K., Zhang, F., Di, C.-A., Yan, T.-W., Zou, Y., Zhou, X., Zhu, D., Wang, J.-Y., & Pei, J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-27
- Volume
- 137
- Issue
- 22
- Pages
- 6979-6982
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2264885024
- Cited by
- 421
- References
- 16
- FWCI
- 14.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.