The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Metal–Organic Polymers Containing Discrete Single-Walled Nanotube as a Heterogeneous Catalyst for the Cycloaddition of Carbon Dioxide to Epoxides
Abstract
The cycloaddition of carbon dioxide to epoxides to produce cyclic carbonates is quite promising and does not result in any side products. A discrete single-walled metal-organic nanotube was synthesized by incorporating a tetraphenyl-ethylene moiety as the four-point connected node. The assembled complex has a large cross-section, with an exterior wall diameter of 3.6 nm and an interior channel diameter of 2.1 nm. It features excellent activity toward the cycloaddition of carbon dioxide, with a turnover number of 17,500 per mole of catalyst and an initial turnover frequency as high as 1000 per mole of catalyst per hour. Only minimal decreases in the catalytic activity were observed after 70 h under identical reaction conditions, and a total turnover number as high as 35,000 was achieved. A simple comparison of relative porous MOFs suggested that the cross-section of the channels is an important factor influencing the transport of the substrates and products through the channel.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capture and conversion of CO2 at ambient conditions by a conjugated microporous polymer
Xie, Y., Wang, T.-T., Liu, X.-H., Zou, K., & Deng, W.-Q. (2013) · Nature Communications · doi:10.1038/ncomms2960 · Cited by 772
Cited by
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Sun, Q., Aguila, B., Perman, J., Nguyen, N., & Ma, S. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10629 · Cited by 487
Metal–organic frameworks for the chemical fixation of CO2 into cyclic carbonates
Pal, T. K., De, D., & Bharadwaj, P. K. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213173 · Cited by 458
Liang, J., Huang, Y.-B., & Cao, R. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.11.013 · Cited by 444
Metadata
- Authors
- Zhou, Z., He, C., Xiu, J., Yang, L., & Duan, C.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-11-24
- Volume
- 137
- Issue
- 48
- Pages
- 15066-15069
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2290797056
- Cited by
- 307
- References
- 1
- FWCI
- 14.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.