The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
All-Polymer Solar Cell Performance Optimized via Systematic Molecular Weight Tuning of Both Donor and Acceptor Polymers
Open accessAbstract
The influence of the number-average molecular weight (Mn) on the blend film morphology and photovoltaic performance of all-polymer solar cells (APSCs) fabricated with the donor polymer poly[5-(2-hexyldodecyl)-1,3-thieno[3,4-c]pyrrole-4,6-dione-alt-5,5-(2,5-bis(3-dodecylthiophen-2-yl)thiophene)] (PTPD3T) and acceptor polymer poly{[N,N'-bis(2-octyldodecyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2); N2200) is systematically investigated. The Mn effect analysis of both PTPD3T and N2200 is enabled by implementing a polymerization strategy which produces conjugated polymers with tunable Mns. Experimental and coarse-grain modeling results reveal that systematic Mn variation greatly influences both intrachain and interchain interactions and ultimately the degree of phase separation and morphology evolution. Specifically, increasing Mn for both polymers shrinks blend film domain sizes and enhances donor-acceptor polymer-polymer interfacial areas, affording increased short-circuit current densities (Jsc). However, the greater disorder and intermixed feature proliferation accompanying increasing Mn promotes charge carrier recombination, reducing cell fill factors (FF). The optimized photoactive layers exhibit well-balanced exciton dissociation and charge transport characteristics, ultimately providing solar cells with a 2-fold PCE enhancement versus devices with nonoptimal Mns. Overall, it is shown that proper and precise tuning of both donor and acceptor polymer Mns is critical for optimizing APSC performance. In contrast to reports where maximum power conversion efficiencies (PCEs) are achieved for the highest Mns, the present two-dimensional Mn optimization matrix strategy locates a PCE "sweet spot" at intermediate Mns of both donor and acceptor polymers. This study provides synthetic methodologies to predictably access conjugated polymers with desired Mn and highlights the importance of optimizing Mn for both polymer components to realize the full potential of APSC performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
VMD: visual molecular dynamics
Humphrey, W., Dalke, A., & Schulten, K. (1996) · Journal of Molecular Graphics · doi:10.1016/0263-7855(96)00018-5 · Cited by 66,952
Canonical dynamics: Equilibrium phase-space distributions
Hoover, W. G. (1985) · Physical Review A · doi:10.1103/physreva.31.1695 · Cited by 23,465
A molecular dynamics method for simulations in the canonical ensemble
Nosé, S. (1984) · Molecular Physics · doi:10.1080/00268978400101201 · Cited by 10,076
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Stille, J. K. (1986) · Angewandte Chemie International Edition in English · doi:10.1002/anie.198605081 · Cited by 3,394
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Liu, Y., Zhao, J., Li, Z., Mu, C., Ma, W., Hu, H., Jiang, K., Lin, H., Ade, H., & Yan, H. (2014) · Nature Communications · doi:10.1038/ncomms6293 · Cited by 3,106
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Self-citation
Cited by
Renewed Prospects for Organic Photovoltaics
Zhang, G., Lin, F. R., Qi, F., Heumüller, T., Distler, A., Egelhaaf, H.-J., Li, N., Chow, P. C. Y., Brabec, C. J., Jen, A. K.-Y., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00955 · Cited by 1,052
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells
Lee, C., Lee, S., Kim, G.-U., Lee, W., & Kim, B. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00044 · Cited by 741
Recent progress in organic solar cells (Part I material science)
Liu, Y., Liu, B., Ma, C.-Q., Huang, F., Feng, G., Chen, H., Hou, J., Yan, L., Wei, Q., Luo, Q., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-021-1180-6 · Cited by 613
Kang, H., Lee, W., Oh, J., Kim, T., Lee, C., & Kim, B. J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00347 · Cited by 442
The Bulk Heterojunction in Organic Photovoltaic, Photodetector, and Photocatalytic Applications
Wadsworth, A., Hamid, Z., Kosco, J., Gasparini, N., & McCulloch, I. (2020) · Advanced Materials · doi:10.1002/adma.202001763 · Cited by 332
Long, X., Ding, Z., Dou, C., Zhang, J., Liu, J., & Wang, L. (2016) · Advanced Materials · doi:10.1002/adma.201601205 · Cited by 331
Wang, W., Wu, Q., Sun, R., Guo, J., Wu, Y., Shi, M., Yang, W., Li, H., & Min, J. (2020) · Joule · doi:10.1016/j.joule.2020.03.019 · Cited by 326
Recent Advances in Wide‐Bandgap Photovoltaic Polymers
Cai, Y., Huo, L., & Sun, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605437 · Cited by 313
Khasbaatar, A., Xu, Z., Lee, J.-H., Campillo-Alvarado, G., Hwang, C., Onusaitis, B. N., & Diao, Y. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00905 · Cited by 290
Near‐Infrared Materials: The Turning Point of Organic Photovoltaics
Meng, D., Zheng, R., Zhao, Y., Zhang, E., Dou, L., & Yang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202107330 · Cited by 286
Zhu, L., Zhang, M., Zhong, W., Leng, S., Zhou, G., Zou, Y., Su, X., Ding, H., Gu, P., Liu, F., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01220g · Cited by 275
Liu, T., Guo, Y., Yi, Y., Huo, L., Xue, X., Sun, X., Fu, H., Xiong, W., Meng, D., Wang, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201602570 · Cited by 264
Gao, L., Zhang, Z., Bin, H., Xue, L., Yang, Y., Wang, C., Liu, F., Russell, T. P., & Li, Y. (2016) · Advanced Materials · doi:10.1002/adma.201601595 · Cited by 260
Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells
Genene, Z., Mammo, W., Wang, E., & Andersson, M. R. (2019) · Advanced Materials · doi:10.1002/adma.201807275 · Cited by 256
Metadata
- Authors
- Zhou, N., Dudnik, A. S., Li, T. I. N. G., Manley, E. F., Aldrich, T. J., Guo, P., Liao, H.-C., Chen, Z., Chen, L. X., Chang, R. P. H., Facchetti, A., Olvera de la Cruz, M., & Marks, T. J.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-21
- Volume
- 138
- Issue
- 4
- Pages
- 1240-1251
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2288936632
- Cited by
- 298
- References
- 66
- FWCI
- 20.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.