The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Single-Crystal Thin Films of Cesium Lead Bromide Perovskite Epitaxially Grown on Metal Oxide Perovskite (SrTiO3)
Open accessAbstract
Abstract High-quality metal halide perovskite single crystals have low defect densities and excellent photophysical properties, yet thin films are the most sought after material geometry for optoelectronic devices. Perovskite single-crystal thin films (SCTFs) would be highly desirable for high-performance devices, but their growth remains challenging, particularly for inorganic metal halide perovskites. Herein, we report the facile vapor-phase epitaxial growth of cesium lead bromide perovskite (CsPbBr3) continuous SCTFs with controllable micrometer thickness, as well as nanoplate arrays, on traditional oxide perovskite SrTiO3(100) substrates. Heteroepitaxial single-crystal growth is enabled by the serendipitous incommensurate lattice match between these two perovskites, and overcoming the limitation of island-forming Volmer–Weber crystal growth is critical for growing large-area continuous thin films. Time-resolved photoluminescence, transient reflection spectroscopy, and electrical transport measurements show that the CsPbBr3 epitaxial thin film has a slow charge carrier recombination rate, low surface recombination velocity (104 cm s–1), and low defect density of 1012 cm–3, which are comparable to those of CsPbBr3 single crystals. This work suggests a general approach using oxide perovskites as substrates for heteroepitaxial growth of halide perovskites. The high-quality halide perovskite SCTFs epitaxially integrated with multifunctional oxide perovskites could open up opportunities for a variety of high-performance optoelectronics devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lead halide perovskite nanowire lasers with low lasing thresholds and high quality factors
Zhu, H., Fu, Y., Meng, F., Wu, X., Gong, Z., Ding, Q., Gustafsson, M. V., Trinh, M. T., Jin, S., & Zhu, X.-Y. (2015) · Nature Materials · doi:10.1038/nmat4271 · Cited by 2,836
Self-citationWang, Q., Hisatomi, T., Jia, Q., Tokudome, H., Zhong, M., Wang, C., Pan, Z., Takata, T., Nakabayashi, M., Shibata, N., et al. (2016) · Nature Materials · doi:10.1038/nmat4589 · Cited by 1,684
Cited by
Fu, Y., Zhu, H., Chen, J., Hautzinger, M. P., Zhu, X.-Y., & Jin, S. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0080-9 · Cited by 934
Self-citationMetal Halide Perovskites for X-ray Imaging Scintillators and Detectors
Zhou, Y., Chen, J., Bakr, O. M., & Mohammed, O. F. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02430 · Cited by 891
Self-citationMetal-Doped Lead Halide Perovskites: Synthesis, Properties, and Optoelectronic Applications
Zhou, Y., Chen, J., Bakr, O. M., & Sun, H.-T. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b02989 · Cited by 650
Self-citationSynthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Low‐Dimensional Metal Halide Perovskite Photodetectors
Wang, H., Li, S., Liu, X., Shi, Z., Fang, X., & He, J. (2021) · Advanced Materials · doi:10.1002/adma.202003309 · Cited by 574
Metadata
- Authors
- Chen, J., Morrow, D. J., Fu, Y., Zheng, W., Zhao, Y., Dang, L., Stolt, M. J., Kohler, D. D., Wang, X., Czech, K. J., Hautzinger, M. P., Shen, S., Guo, L., Pan, A., Wright, J. C., & Jin, S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-13
- Volume
- 139
- Issue
- 38
- Pages
- 13525-13532
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2753918148
- Cited by
- 291
- References
- 2
- FWCI
- 10.96
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.