The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Removal of Rhodamine B from Aqueous Solution Using Palm Shell-Based Activated Carbon: Adsorption and Kinetic Studies
Abstract
Palm shell derived activated carbon was utilized as a potential adsorbent to remove rhodamine B (RB) from aqueous solution. Activated carbon was prepared from palm shell through a physiochemical activation process to yield a sample with a Brunauer−Emmett−Teller (BET) surface area of 476.8 m 2 ·g −1 . The ability of the prepared activated carbon for dye adsorption was examined in a series of batch experiments. The effect of various process parameters such as initial dye concentration [(41.8 to 208.8) μmol·L −1 ], solution pH (3 to 11), and temperature [(30 to 50) °C] on the adsorption capacity of the adsorbent was investigated. Various adsorption isotherms (Langmuir, Freundlich, and Temkin) were used to interpret the experimental data. The obtained sorption data were reasonably described by the Langmuir model. The Temkin isotherm confirmed the presence of a repulsive lateral interaction in the adsorbent surface. Pseudofirst- and second-order kinetic models were used to predict the kinetics of the adsorption process. The obtained results revealed that the adsorption of RB on activated carbon followed a pseudosecond-order kinetic model. A maximum dye removal efficiency of 95 % was achieved at an initial dye concentration of 62.6 μmol·L −1, pH of 3, and temperature of 50 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
HE, Z., YANG, S., JU, Y., & SUN, C. (2009) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)62262-7 · Cited by 242
Cited by
Three-Dimensional Graphene Oxide Nanostructure for Fast and Efficient Water-Soluble Dye Removal
Liu, F., Chung, S., Oh, G., & Seo, T. S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201590z · Cited by 671
Zhang, X., Feng, M., Qu, R., Liu, H., Wang, L., & Wang, Z. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.096 · Cited by 374
Functionalized Locust Bean Pod (Parkia Biglobosa) Activated Carbon for Rhodamine B Dye Removal
Bello, O. S., Adegoke, K. A., Sarumi, O. O., & Lameed, O. S. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e02323 · Cited by 117
Metadata
- Authors
- Mohammadi, M., Hassani, A. J., Mohamed, A. R., & Najafpour, G. D.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-11-08
- Volume
- 55
- Issue
- 12
- Pages
- 5777-5785
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W2327673195
- Cited by
- 197
- References
- 1
- FWCI
- 4.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.