Adsorption of Cationic Dyes on a Cellulose-Based Multicarboxyl Adsorbent
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A novel adsorbent based on cellulose (CGD) was prepared via modifying with glycidyl methacrylate (GMA) and diethylenetriamine pentaacetic acid (DTPA), characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential thermogravimetry (DTA/TGA). Malachite green (MG) and basic fuchsine (BF) were used to resemble cationic dyes in wastewaters. The influences of several parameters (contact time, pH, temperature, initial concentration) were evaluated to determine the best adsorption conditions. Langmuir adsorption isotherm items explained MG adsorption well, while BF was fitted well with the Freundlich model. The maximum adsorption capacities were greater than some other reports, 1155.76 mg·g –1 for a BF internal concentration of 2000 mg·L –1 and 458.72 mg·g –1 for MG in theory. Kinetics and thermodynamics were adopted to explain in-depth information associated with the adsorption process. The adsorption processes of dyes were both feasible spontaneous and well-described by the pseudosecond-order model. The dynamic adsorption/desorption experiments, with saturated sodium bicarbonate solution as the eluent, show that the adsorbent could be reused for five cycles or four cycles, keeping the adsorption rate above 85 % and 90 % for BF and MG, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dye Adsorption on Layered Graphite Oxide
Bradder, P., Ling, S. K., Wang, S., & Liu, S. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je101049g · Cited by 381
Cited by
A review on modification methods to cellulose-based adsorbents to improve adsorption capacity
Hokkanen, S., Bhatnagar, A., & Sillanpää, M. (2016) · Water Research · doi:10.1016/j.watres.2016.01.008 · Cited by 1,081
Adsorption Removal of Dyes from Single and Binary Solutions Using a Cellulose-based Bioadsorbent
Liu, L., Gao, Z. Y., Su, X. P., Chen, X., Jiang, L., & Yao, J. M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500848m · Cited by 580
Ghorai, S., Sarkar, A., Raoufi, M., Panda, A. B., Schönherr, H., & Pal, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4055657 · Cited by 529
Wang, F., Pan, Y., Cai, P., Guo, T., & Xiao, H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.05.162 · Cited by 337
Leng, L., Yuan, X., Zeng, G., Shao, J., Chen, X., Wu, Z., Wang, H., & Peng, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.019 · Cited by 335
Metadata
- Authors
- Zhou, Y., Zhang, M., Hu, X., Wang, X., Niu, J., & Ma, T.
- Venue
- Journal of Chemical & Engineering Data
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-09
- Volume
- 58
- Issue
- 2
- Pages
- 413-421
- ISSN
- 0021-9568 (ISSN-L)
- 1520-5134
- OpenAlex
- W2331255544
- Cited by
- 145
- References
- 1
- FWCI
- 10.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.