The DOI matches its Crossref record.
Luminescence Quantum Efficiency of Nanocrystalline ZnS:Mn2+. 1. Surface Passivation and Mn2+ Concentration
Abstract
The luminescence quantum efficiency of nanocrystalline ZnS:Mn 2+ is studied to provide a better understanding on how the quantum efficiency is influenced by the Mn 2+ concentration, the nature of the passivating polymer, and the synthesis conditions. The results show an increase of the luminescence quantum efficiency with the Mn 2+ concentration in the nanocrystals for very low Mn 2+ concentrations. Between 0.3 and 1.5 at. % Mn 2+ the increase in quantum efficiency levels off, to reach an almost constant level between 1.5 and 5.6 at. % Mn 2+ . Up to a concentration of 5.6 at. %, no concentration quenching is observed. The influence of the nature of the passivating polymer is investigated by comparing the luminescence quantum efficiencies for nanoparticles coated with poly(vinylbutyral) (PVB), poly(vinyl alcohol) (PVA), methacrylic acid (MA), or sodium polyphosphate (PP) or without a passivating polymer. For the presently used synthesis method (in water), the highest quantum efficiencies (around 4%) are obtained for nanocrystalline ZnS:Mn 2+ capped with PP. Nanoparticles synthesized in a nitrogen atmosphere have higher quantum yields than nanoparticles made in ambient air. In general, large variations in luminescence properties are observed due to unintentional variations in the synthesis conditions. For research on the luminescence properties and quantum efficiencies of nanocrystalline ZnS:Mn 2+, it is very important to check the reproducibility of results, to standardize synthesis conditions, and to measure absolute quantum efficiencies rather than relative changes in luminescence intensity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Quantum Dots and Their Multimodal Applications: A Review
Bera, D., Qian, L., Tseng, T.-K., & Holloway, P. H. (2010) · Materials · doi:10.3390/ma3042260 · Cited by 1,365
Multimodality Imaging Probes: Design and Challenges
Louie, A. (2010) · Chemical Reviews · doi:10.1021/cr9003538 · Cited by 1,044
Doped quantum dots for chemo/biosensing and bioimaging
Wu, P., & Yan, X.-P. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60017c · Cited by 667
Aqueous Based Semiconductor Nanocrystals
Jing, L., Kershaw, S. V., Li, Y., Huang, X., Li, Y., Rogach, A. L., & Gao, M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00041 · Cited by 452
Amine-Capped ZnS−Mn2+ Nanocrystals for Fluorescence Detection of Trace TNT Explosive
Tu, R., Liu, B., Wang, Z., Gao, D., Wang, F., Fang, Q., & Zhang, Z. (2008) · Analytical Chemistry · doi:10.1021/ac800060f · Cited by 354
Luminescence in Sulfides: A Rich History and a Bright Future
Smet, P. F., Moreels, I., Hens, Z., & Poelman, D. (2010) · Materials · doi:10.3390/ma3042834 · Cited by 300
Wang, Y., Tang, Z., Correa-Duarte, M. A., Pastoriza-Santos, I., Giersig, M., Kotov, N. A., & Liz-Marzán, L. M. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp048948t · Cited by 270
Synthesis and properties of transition metals and rare-earth metals doped ZnS nanoparticles
Hu, H., & Zhang, W. (2006) · Optical Materials · doi:10.1016/j.optmat.2005.03.015 · Cited by 263
Metadata
- Authors
- Bol, A. A., & Meijerink, A.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-09-28
- Volume
- 105
- Issue
- 42
- Pages
- 10197-10202
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2041148720
- Cited by
- 164
- References
- 0
- FWCI
- 4.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.