CoChat

Characterization of Pt Nanoparticles Encapsulated in Al2O3 and Their Catalytic Efficiency in Propene Hydrogenation

Yoo, Jung Whan, Hathcock, David, El-Sayed, Mostafa A. · 2002 · The Journal of Physical Chemistry A
Cited by 79

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Pt nanoparticles supported in nanoporous Al 2 O 3 catalyst are prepared by reduction of K 2 PtCl 4 solution using H 2 in the presence of Al 2 O 3 and poly(acrylic acid) as capping material. After thorough washing with water to remove Pt nanoparticles located on the external surface of the Al 2 O 3 and drying at 70 °C for 12 h, they were used in propene hydrogenation to evaluate catalytic activity as measured by the value of the activation energy in the temperature range between 30 and 90 °C. The Pt nanoparticles are characterized by using transmission electron microscopy (TEM). The particles in Pt/Al 2 O 3 are found to be encapsulated and uniformly dispersed inside the Al 2 O 3; however, the size and shapes are not clearly seen. After extraction of the Pt nanoparticles from the Al 2 O 3 channels by using an ethanol-diluted HF solution, various shapes such as truncated octahedral, cubic, tetrahedral, and spherical with a size around 5 nm are observed. The encapsulated particles have various shapes but are smaller in size than those prepared in K 2 PtCl 4 solution with polyacrylate in the absence of Al 2 O 3 . Using FT-IR studies, the capping material initially used in Pt/Al 2 O 3 is not found in the Al 2 O 3 channels. This might be due to the fact that the polymer (average MW 2100) is too large to be accommodated within the Al 2 O 3 pores. The nanopores of Al 2 O 3 have several roles in the synthesis of these nanoparticles. It allows for uniform dispersion and encapsulation of Pt nanoparticles. It controls the Pt sizes with narrow distribution that is determined by the pore dimension (5.8 nm). It protects against metal particle aggregation and produces various shapes even in the absence of the capping material. Using these Pt nanoparticles, the catalysis of hydrogenation of propene gas was studied. The initial rates, reaction order, rate constants, and activation energy for the hydrogenation are determined by use of mass spectrometric techniques. The activation energy is found to be 5.7 kcal/mol, which is about one-half that previously reported for catalysis by Pt metal deposited in SiO 2 and TiO 2 synthesized by using H 2 PtCl 6 and Pt(allyl) 2 by impregnation method.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/jp0121318

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 79

Metadata

Authors
Yoo, J. W., Hathcock, D., & El-Sayed, M. A.
Venue
The Journal of Physical Chemistry A
Published
2001-10-04
Volume
106
Issue
10
Pages
2049-2054
ISSN
  • 1089-5639 (ISSN-L)
  • 1520-5215
OpenAlex
W2090762397
Cited by
79
References
1
FWCI
4.81
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.