The DOI matches its Crossref record.
Photoelectrochemical Approach for Metal Corrosion Prevention Using a Semiconductor Photoanode
Abstract
Metal corrosion was successfully prevented using a TiO 2 -based photoelectrochemical system. Under UV illumination, a TiO 2 electrode in a hole scavenging medium supplied photogenerated conduction band electrons to an electrically connected steel electrode with the generation of photocurrent and shifted the coupled potential to much more negative values. In this galvanic pair, the steel and the TiO 2 electrode acted as a cathode and a photoanode, respectively, which is essentially a variation of cathodic protection. The performance of the photocathodic protection depended little on the light intensity as long as there were enough photons to compensate for the dark corrosion current of the steel. The shiny surface of the steel electrode remained intact in a corrosive electrolyte solution as long as it was connected to the UV-illuminated TiO 2 photoanode, but it quickly corroded and was covered by red-brown rust in the absence of light. An outdoor test under solar light also showed a similar effect of corrosion prevention, which verified the possibility of using solar light for corrosion prevention. Although formate was useful as a hole scavenger, pure water without any added hole scavenger was also successful in protecting metal. The performance of the ZnO photoanode was similar to that of TiO 2 . Various experimental parameters affecting the new photocathodic protection system were investigated and are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
TiO2 photocatalysis and related surface phenomena
FUJISHIMA, A., ZHANG, X., & TRYK, D. (2008) · Surface Science Reports · doi:10.1016/j.surfrep.2008.10.001 · Cited by 6,737
Ionic liquids as green and sustainable corrosion inhibitors for metals and alloys: An overview
Verma, C., Ebenso, E. E., & Quraishi, M. A. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.02.111 · Cited by 641
Photoinduced charge transfer processes in solar photocatalysis based on modified TiO 2
Park, H., Kim, H.-I., Moon, G.-H., & Choi, W. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02575c · Cited by 582
Self-citationShen, G. X., Chen, Y. C., & Lin, C. J. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2005.05.016 · Cited by 334
Bae, E., Choi, W., Park, J., Shin, H. S., Kim, S. B., & Lee, J. S. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047777p · Cited by 295
Self-citationProbing reaction mechanisms in mixed phase TiO2 by EPR
Hurum, D. C., Agrios, A. G., Crist, S. E., Gray, K. A., Rajh, T., & Thurnauer, M. C. (2006) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/j.elspec.2005.01.294 · Cited by 260
Metadata
- Authors
- Park, H., Kim, K. Y., & Choi, W.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-04-06
- Volume
- 106
- Issue
- 18
- Pages
- 4775-4781
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2332687001
- Cited by
- 161
- References
- 0
- FWCI
- 5.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.