The DOI matches its Crossref record.
Electronic Control of Chemistry and Catalysis at the Surface of an Individual Tin Oxide Nanowire
Abstract
Tin oxide single nanowires configured as field effect transistors were shown to be operable and tunable alternately as gas sensors or as catalysts under a gaseous atmosphere that simulated realistic ambient conditions. The unusually large surface-to-volume ratio available with nanowires causes adsorption or desorption of donor or acceptor molecules on the nanowire's surface to greatly alter its bulk electron density at relatively small values of the gate voltage. This process can be sensitively monitored as changes in the nanowire's conductivity. The potentially radical change in carrier density can lead to significant changes in the nanowire's sensitivity as a sensor or reciprocally as a catalyst in reactions that involve charge exchange across the nanowire's surface. This leads to the prospect of tuning catalysis or other surface reactions entirely through electronic means.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Metal oxides for solid-state gas sensors: What determines our choice?
Korotcenkov, G. (2007) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2007.01.044 · Cited by 1,670
Ghicov, A., & Schmuki, P. (2009) · Chemical Communications · doi:10.1039/b822726h · Cited by 867
Chemical sensors based on nanostructured materials
Huang, X.-J., & Choi, Y.-K. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2006.06.022 · Cited by 662
Comini, E., Baratto, C., Faglia, G., Ferroni, M., Vomiero, A., & Sberveglieri, G. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.003 · Cited by 641
One dimensional nanostructured materials
Kuchibhatla, S. V. N. T., Karakoti, A. S., Bera, D., & Seal, S. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.08.001 · Cited by 631
Facile Coating of Manganese Oxide on Tin Oxide Nanowires with High-Performance Capacitive Behavior
Yan, J., Khoo, E., Sumboja, A., & Lee, P. S. (2010) · ACS Nano · doi:10.1021/nn100592d · Cited by 540
UV-Enhanced NO2Gas Sensing Properties of SnO2-Core/ZnO-Shell Nanowires at Room Temperature
Park, S., An, S., Mun, Y., & Lee, C. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400500a · Cited by 439
In Situ and Operando Spectroscopy for Assessing Mechanisms of Gas Sensing
Gurlo, A., & Riedel, R. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200602597 · Cited by 411
UV-activated room-temperature gas sensing mechanism of polycrystalline ZnO
Fan, S.-W., Srivastava, A. K., & Dravid, V. P. (2009) · Applied Physics Letters · doi:10.1063/1.3243458 · Cited by 357
Ba, J., Polleux, J., Antonietti, M., & Niederberger, M. (2005) · Advanced Materials · doi:10.1002/adma.200501018 · Cited by 271
Metadata
- Authors
- Zhang, Y., Kolmakov, A., Lilach, Y., & Moskovits, M.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-15
- Volume
- 109
- Issue
- 5
- Pages
- 1923-1929
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2066087567
- Cited by
- 159
- References
- 0
- FWCI
- 10.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.