The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effects of Simultaneously Doped and Deposited Ag on the Photocatalytic Activity and Surface States of TiO2
Abstract
Ag-TiO2 catalysts with different Ag contents were prepared via a sol-gel method in the absence of light. Based on the characterizations of XRD, photoluminescence (PL), surface photovoltage spectroscopy (SPS), field-induced surface photovoltage spectroscopy (FISPS), and XPS as well as the evaluation of the photocatalytic activity for degrading rhodamine B(RhB) solutions, it was found that the Ag dopant promoted the phase transformation as well as had an inhibition effect on the growth of anatase crystallite. The PL and SPS intensities were decreased with increasing Ag content, indicating that the Ag dopant could effectively inhibit the recombination of the photoinduced electrons and holes. However, the active sites capturing the photoinduced electrons reduced, while the Ag content exceeded 5 mol %. At rather low Ag dopant concentrations, the migration and diffusion of Ag+ ions were predominant, while at rather high Ag dopant concentrations, the migration, diffusion, and reduction of Ag ions simultaneously occurred. The Ag-TiO2 photocatalysts with appropriate content of Ag (Ag species concentration is from about 3 to 5 mol %) possessed abundant electron traps so as to be favorable for the separation of the photoinduced electron-hole pairs, which could greatly enhance the activity of the photocatalysts. From the results of FISPS measurements, it could be found that the impurity bands and abundant surface states were introduced into the interfacial layer of TiO2 because of Ag simultaneously doping and depositing, which could improve the absorption capability for visible light of the photocatalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
Cited by
Photoelectrocatalytic materials for environmental applications
Zhang, H., Chen, G., & Bahnemann, D. W. (2009) · Journal of Materials Chemistry · doi:10.1039/b821991e · Cited by 960
Wang, Z., Yang, C., Lin, T., Yin, H., Chen, P., Wan, D., Xu, F., Huang, F., Lin, J., Xie, X., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300486 · Cited by 719
Silver doped titanium dioxide nanomaterials for enhanced visible light photocatalysis
Seery, M. K., George, R., Floris, P., & Pillai, S. C. (2007) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2007.02.010 · Cited by 616
Recent Advances and Applications of Semiconductor Photocatalytic Technology
Zhang, F., Wang, X., Liu, H., Liu, C., Wan, Y., Long, Y., & Cai, Z. (2019) · Applied Sciences · doi:10.3390/app9122489 · Cited by 543
Surface modification of ZnO with Ag improves its photocatalytic efficiency and photostability
Xie, W., Li, Y., Sun, W., Huang, J., Xie, H., & Zhao, X. (2010) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2010.06.032 · Cited by 302
Metadata
- Authors
- Xin, B., Jing, L., Ren, Z., Wang, B., & Fu, H.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-27
- Volume
- 109
- Issue
- 7
- Pages
- 2805-2809
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2020083028
- Cited by
- 556
- References
- 1
- FWCI
- 8.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.