Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 167

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Structural, Optical, and Photoelectrochemical Properties of Mn+−TiO2 Model Thin Film Photocatalysts

Gracia, F., Holgado, J. P., Caballero, A., Gonzalez-Elipe, A. R.·2004·The Journal of Physical Chemistry B

Abstract

M n + −TiO 2 thin films (M: Cr, V, Fe, Co) with different M/Ti ratios have been prepared by ion beam induced CVD (IBICVD) with the aim of investigating their structural, optical, and photocatalytic properties. These samples can be considered as model systems to describe the photocatalytic behavior of other M n + −TiO 2 materials reported in the literature. In their “as prepared” state the samples were amorphous and the cations were homogeneously distributed within the TiO 2 layer. Crystallization of the thin films upon annealing has been investigated with X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR). This latter technique has proved to be a suitable and rapid method of crystal phase assessment of TiO 2 . After annealing at T > 573 K, TiO 2 crystallizes into the anatase or rutile structures depending on the type and amount of cations present in the film. The local environment around the different cations has been ascertained by X-ray absorption spectroscopy (XAS). It has been shown that after annealing, partial segregation of the cations in the form of M 2 O n aggregates takes place. The extent of this segregation depends on the type of cation, being larger for Fe and Co than for V and Cr. Both the doping with a foreign cation and the oxide segregation greatly affect the crystallization behavior of TiO 2 thin films favoring the development of the rutile structure even at relatively low temperatures (i.e., T ∼ 673 K). The light absorption properties of M n + −TiO 2 systems have been traditionally considered as a hint to determine whether they are photoactive with visible light. In this paper the light absorption properties of the M n + −TiO 2 thin films have been investigated and compared with their photoelectrochemical behavior. As a general result it has been found that incorporation of increasing amounts of a cation M in the original thin films produces a progressive shift of the absorption threshold toward the visible. However, a further shift toward the visible in the light absorption found for the annealed samples is attributed to the segregation of M 2 O n agglomerates. Either for the original or the annealed M n + −TiO 2 samples, no improvement of the photoactivity of the system, but its degradation with respect to pure TiO 2 is found. This behavior shows that by itself a shift toward the visible in the light absorption of M n + −TiO 2 materials does not ensure that they have an enhanced photocatalytic efficiency at longer wavelengths.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/jp0484938

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

Metadata

Authors
Gracia, F., Holgado, J. P., Caballero, A., & Gonzalez-Elipe, A. R.
Venue
The Journal of Physical Chemistry B
Published
2004-10-14
Volume
108
Issue
45
Pages
17466-17476
ISSN
  • 1520-5207 (ISSN-L)
  • 1520-6106
OpenAlex
W2312340549
Cited by
167
References
1
FWCI
6.00
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.