Electrochemical Formation of a Pt/Zn Alloy and Its Use as a Catalyst for Oxygen Reduction Reaction in Fuel Cells
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The characterization of an electrochemically created Pt/Zn alloy by Auger electron spectroscopy is presented indicating the formation of the alloy, the oxidation of the alloy, and the room temperature diffusion of the Zn into the Pt regions. The Pt/Zn alloy is stable up to 1.2 V/RHE and can only be removed with the oxidation of the base Pt metal either electrochemically or in aqua regia. The Pt/Zn alloy was tested for its effectiveness toward oxygen reduction. Kinetics of the oxygen reduction reaction (ORR) were measured using a rotating disk electrode (RDE), and a 30 mV anodic shift in the potential of ORR was found when comparing the Pt/Zn alloy to Pt. The Tafel slope was slightly smaller than that measured for the pure Pt electrode. A simple procedure for electrochemically modifying a Pt-containing gas diffusion electrode (GDE) with Zn was developed. The Zn-treated GDE was pressed with an untreated GDE anode, and the created membrane electrode assembly was tested. Fuel cell testing under two operating conditions (similar anode and cathode inlet pressures, and a larger cathode inlet pressure) indicated that the 30 mV shift observed on the RDE was also evident in the fuel cell tests. The high stability of the Pt/Zn alloy in acidic environments has a potential benefit for fuel cell applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mukerjee, S., Srinivasan, S., Soriaga, M. P., & McBreen, J. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100013a032 · Cited by 439
Catalysis for Low Temperature Fuel Cells: PART I: THE CATHODE CHALLENGES
Ralph, T. R., & Hogarth, M. P. (2002) · Platinum Metals Review · doi:10.1595/003214002x461314 · Cited by 338
Cited by
Electrochemical Energy Conversion on Intermetallic Compounds: A Review
Rößner, L., & Armbrüster, M. (2019) · ACS Catalysis · doi:10.1021/acscatal.8b04566 · Cited by 342
Venkateswara Rao, C., & Viswanathan, B. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9041606 · Cited by 96
Pt Alloy Electrocatalysts for Proton Exchange Membrane Fuel Cells: A Review
Liu, Z., Ma, L., Zhang, J., Hongsirikarn, K., & Goodwin, J. G. (2013) · Catalysis Reviews · doi:10.1080/01614940.2013.795455 · Cited by 77
Liu, M., Lu, B., Yang, G., Yuan, P., Xia, H., Wang, Y., Guo, K., Zhao, S., Liu, J., Yu, Y., et al. (2022) · Advanced Science · doi:10.1002/advs.202200147 · Cited by 65
Metadata
- Authors
- Sode, A., Li, W., Yang, Y., Wong, P. C., Gyenge, E., Mitchell, K. A. R., & Bizzotto, D.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-12
- Volume
- 110
- Issue
- 17
- Pages
- 8715-8722
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2035179956
- Cited by
- 47
- References
- 2
- FWCI
- 3.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.