The DOI matches its Crossref record.
Microstructure Design of Nanoporous TiO2Photoelectrodes for Dye-Sensitized Solar Cell Modules
Abstract
The optimization of dye-sensitized solar cells, especially the design of nanoporous TiO2 film microstructure, is an urgent problem for high efficiency and future commercial applications. However, up to now, little attention has been focused on the design of nanoporous TiO2 microstructure for a high efficiency of dye-sensitized solar cell modules. The optimization and design of TiO2 photoelectrode microstructure are discussed in this paper. TiO2 photoelectrodes with three different layers, including layers of small pore size films, larger pore size films, and light-scattering particles on the conducting glass with the desirable thickness, were designed and investigated. Moreover, the photovoltaic properties showed that the different porosities, pore size distribution, and BET surface area of each layer have a dramatic influence on short-circuit current, open-circuit voltage, and fill factor of the modules. The optimization and design of TiO2 photoelectrode microstructure contribute a high efficiency of DSC modules. The photoelectric conversion efficiency around 6% with 15 x 20 cm2 modules under illumination of simulated AM1.5 sunlight (100 mW/cm2) and 40 x 60 cm2 panels with the same performance tested outdoor have been achieved by our group.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bell, N. J., Ng, Y. H., Du, A., Coster, H., Smith, S. C., & Amal, R. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1113575 · Cited by 445
Wu, W.-Q., Lei, B.-X., Rao, H.-S., Xu, Y.-F., Wang, Y.-F., Su, C.-Y., & Kuang, D.-B. (2013) · Scientific Reports · doi:10.1038/srep01352 · Cited by 339
Controlled electron injection and transport at materials interfaces in dye sensitized solar cells
Thavasi, V., Renugopalakrishnan, V., Jose, R., & Ramakrishna, S. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2008.09.001 · Cited by 319
Review of Recent Progress in Dye-Sensitized Solar Cells
Kong, F.-T., Dai, S.-Y., & Wang, K.-J. (2007) · Advances in OptoElectronics · doi:10.1155/2007/75384 · Cited by 165
Self-citation
Metadata
- Authors
- Hu, L., Dai, S., Weng, J., Xiao, S., Sui, Y., Huang, Y., Chen, S., Kong, F., Pan, X., Liang, L., & Wang, K.
- Venue
- The Journal of Physical Chemistry B
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-12-10
- Volume
- 111
- Issue
- 2
- Pages
- 358-362
- ISSN
- 1520-5207 (ISSN-L)
- 1520-6106
- OpenAlex
- W2328341993
- Cited by
- 178
- References
- 0
- FWCI
- 7.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructure Design of Nanoporous TiO2Photoelectrodes for Dye-Sensitized Solar Cell Modules. https://app.cochat.ai/papers/10.1021/jp065541a
- The paper
- Hu, L., Dai, S., Weng, J., Xiao, S., Sui, Y., Huang, Y., Chen, S., Kong, F., Pan, X., Liang, L., & Wang, K. (2007). Microstructure Design of Nanoporous TiO2Photoelectrodes for Dye-Sensitized Solar Cell Modules. The Journal of Physical Chemistry B. https://doi.org/10.1021/jp065541a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.