Porous Carbon Supports Prepared by Ultrasonic Spray Pyrolysis for Direct Methanol Fuel Cell Electrodes
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Carbon powders composed of porous micrometer-sized spheres were synthesized from simple organic salt precursors using ultrasonic spray pyrolysis (USP). These materials were tested as catalyst supports for a direct methanol fuel cell (DMFC) catalyst and as pore formers in a membrane electrode assembly (MEA). The effect of these materials on unit cell performance was evaluated and compared to traditional Vulcan XC-72 carbon nanoparticle powder. USP provides a simple and facile way to prepare porous carbons with various morphologies and pore sizes. In exploring these new morphologies of carbon, two types of micrometer-sized spherical porous carbons were tested as pore-forming additives for both the anode catalyst (i.e., PtRu/C for methanol oxidation) and the cathode catalyst (i.e., Pt/C for O 2 reduction). The anode catalyst mixture of PtRu/Vulcan and PtRu/PC-I (weight ratio 2:1, 33 wt % PC-I) showed the highest performance improvement and is attributed to the synergic effect of two carbons (PC-I and Vulcan XC-72); the mixture improves the effective mass transport of reactant methanol and products while maintaining a reasonably high conductivity. For the reduction of O 2 at the cathode, the addition of relatively small amounts of carbon microspheres (PC-II) significantly improved the performance of the cathode when they were added to the E-TEK commercial Pt/C catalyst. Even at a relatively slow airflow rate, the maximum power density of the MEA with 1.25 wt % PC-II was maintained without a significant decrease. O 2 is, of course, much less viscous than methanol, and consistent with that, the amount of pore loading required is much less for the cathode than for the anode (i.e., 1.25 wt % vs 33 wt %). These results demonstrate that the inclusion of carbon microspheres is an effective way to facilitate the mass transport of air and methanol, emphasizing the importance of pore structure at both the cathode and anode in the development of efficient self-breathing direct methanol fuel cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhancement of the Electroreduction of Oxygen on Pt Alloys with Fe, Ni, and Co
Toda, T., Igarashi, H., Uchida, H., & Watanabe, M. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392544 · Cited by 1,336
Versatility of chemical spray pyrolysis technique
Patil, P. S. (1999) · Materials Chemistry and Physics · doi:10.1016/s0254-0584(99)00049-8 · Cited by 731
Yoon, S. B., Chai, G. S., Kang, S. K., Yu, J.-S., Gierszal, K. P., & Jaroniec, M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0423466 · Cited by 271
Monodisperse PtRu Nanoalloy on Carbon as a High-Performance DMFC Catalyst
Lee, Y. H., Lee, G., Shim, J. H., Hwang, S., Kwak, J., Lee, K., Song, H., & Park, J. T. (2006) · Chemistry of Materials · doi:10.1021/cm052881k · Cited by 77
Research works printed but not linked: 48
- Lu A. H., 2003, Adv. Mater., 15, 1602, 10.1002/adma.200305176 · DOI · Paper page
- Kua J., 1999, J. Am. Chem. Soc., 121, 10928, 10.1021/ja9844074 · DOI · Paper page
- Ley K. L., 1997, J. Electrochem. Soc., 144, 1543, 10.1149/1.1837638 · DOI · Paper page
- Arico A. S., 1994, J. Power Sources, 50, 295, 10.1016/0378-7753(94)01908-8 · DOI
- Frelink T., 1995, Surf. Sci., 335, 353, 10.1016/0039-6028(95)00412-2 · DOI · Paper page
- Li H. Q., 2004, Chem. Commun., 2776, 10.1039/b409539a · DOI
- Salgado J. R. C., 2005, Environ
- Xiong L., 2004, Electrochim. Acta, 49, 4163, 10.1016/j.electacta.2004.04.011 · DOI · Paper page
- Bock C., 2004, J. Am. Chem. Soc., 126, 8028, 10.1021/ja0495819 · DOI · Paper page
- Xue X., 2005, Chem. Commun., 1601, 10.1039/B418227H · doi:10.1039/b418227h
- Ganesan R., 2005, Angew. Chem., Int. Ed., 44, 6557, 10.1002/anie.200501272 · DOI · Paper page
- Fernandez J. L., 2005, J. Am. Chem. Soc., 127, 13100, 10.1021/ja0534710 · DOI · Paper page
- Liao S., 2006, J. Am. Chem. Soc., 128, 3504, 10.1021/ja0578653 · DOI · Paper page
- Shao M.-H., 2006, J. Am. Chem. Soc., 128, 3526, 10.1021/ja060167d · DOI · Paper page
- Chai G. S., 2004, Adv. Mater., 16, 2057, 10.1002/adma.200400283 · DOI · Paper page
- Chai G. S., 2004, J. Phys. Chem. B, 108, 7074, 10.1021/jp0370472 · DOI · Paper page
- Han S., 2003, Adv. Mater., 15, 1922, 10.1002/adma.200305697 · DOI · Paper page
- Hyeon T., 2003, Angew. Chem., Int. Ed., 42, 4352, 10.1002/anie.200250856 · DOI · Paper page
- Park K. W., 2004, J. Phys. Chem. B, 108, 939, 10.1021/jp0368031 · DOI · Paper page
- Yu J.-S., 2002, J. Am. Chem. Soc., 124, 9382, 10.1021/ja0203972 · DOI · Paper page
- Park I.-S., 2007, Carbon, 45, 28, 10.1016/j.carbon.2006.08.011 · DOI · Paper page
- Chai G. S., 2004, Chem. Commun., 2766, 10.1039/b412747c · DOI · Paper page
- Bessel C. A., 2001, J. Phys. Chem. B, 105, 1115, 10.1021/jp003280d · DOI · Paper page
- Steigerwalt E. S., 2002, J. Phys. Chem. B, 106, 760, 10.1021/jp012707t · DOI · Paper page
- Hull R. V., 2006, Chem. Mater., 18, 1780, 10.1021/cm0518978 · DOI · Paper page
- Li W. Z., 2002, Carbon, 40, 791, 10.1016/S0008-6223(02)00039-8 · DOI · Paper page
- Han K. I., 2004, Electrochim. Acta, 50, 791, 10.1016/j.electacta.2004.01.115 · DOI
- Liu Y. C., 2002, Carbon, 40, 2375, 10.1016/S0008-6223(02)00115-X · DOI
- Zhang W. H., 2000, Chem. Mater., 12, 1408, 10.1021/cm990740a · DOI · Paper page
- Takasu Y., 2003, Electrochim. Acta, 48, 3861, 10.1016/S0013-4686(03)00521-8 · DOI
- Joo S. H., 2001, Nature, 412, 169, 10.1038/35084046 · DOI · Paper page
- Raghuveer V., 2004, Electrochem. Solid-State Lett., 7, A336, 10.1149/1.1792264 · DOI
- Su F. B., 2005, Chem. Mater., 17, 3960, 10.1021/cm0502222 · DOI · Paper page
- Kodas T. T., 1999, Aerosol Processing of Materials
- Okuyama K., 2003, Chem. Eng. Sci., 58, 537, 10.1016/S0009-2509(02)00578-X · DOI · Paper page
- Xia B., 2001, Adv. Mater., 13, 1579, 10.1002/1521-4095(200110)13:20<1579::AID-ADMA1579>3.0.CO;2-G · DOI · Paper page
- Skrabalak S. E., 2005, J. Am. Chem. Soc., 127, 9990, 10.1021/ja051654g · DOI · Paper page
- Suh W. H., 2005, J. Am. Chem. Soc., 127, 12007, 10.1021/ja050693p · DOI
- Didenko Y., 2005, J. Am. Chem. Soc., 127, 12196, 10.1021/ja054124t · DOI
- Skrabalak S. E., 2006, J. Am. Chem. Soc., 128, 12642, 10.1021/ja064899h · DOI · Paper page
- Jun S., 2000, J. Am. Chem. Soc., 122, 10712, 10.1021/ja002261e · DOI · Paper page
- Lee J., 2001, J. Am. Chem. Soc., 123, 5146, 10.1021/ja015510n · DOI · Paper page
- Jang J., 2002, Adv. Mater., 14, 1390, 10.1002/1521-4095(20021002)14:19<1390::AID-ADMA1390>3.0.CO;2-T · DOI
- Lee J.-S., 2002, J. Am. Chem. Soc., 124, 1156, 10.1021/ja012333h · DOI · Paper page
- Jang J., 2005, Chem. Commun., 4214, 10.1039/b506265a · DOI
- Sayari A., 2005, Chem. Mater., 17, 6108, 10.1021/cm050960q · DOI
- Gierszal K. P., 2006, J. Am. Chem. Soc., 128, 10026, 10.1021/ja0634831 · DOI
- Bönnemann H., 1996, J. Organomet. Chem., 520, 143, 10.1016/0022-328X(96)06273-0 · DOI · Paper page
Cited by
Applications of Ultrasound to the Synthesis of Nanostructured Materials
Bang, J. H., & Suslick, K. S. (2010) · Advanced Materials · doi:10.1002/adma.200904093 · Cited by 1,895
Self-citationHierarchically porous materials: synthesis strategies and structure design
Yang, X.-Y., Chen, L.-H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B.-L. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00829a · Cited by 1,439
Carbon supports for low-temperature fuel cell catalysts
Antolini, E. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.09.030 · Cited by 1,295
Wang, Y.-J., Zhao, N., Fang, B., Li, H., Bi, X. T., & Wang, H. (2015) · Chemical Reviews · doi:10.1021/cr500519c · Cited by 1,267
Hierarchically Structured Porous Materials for Energy Conversion and Storage
Li, Y., Fu, Z., & Su, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200591 · Cited by 951
Metadata
- Authors
- Bang, J. H., Han, K., Skrabalak, S. E., Kim, H., & Suslick, K. S.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-06-30
- Volume
- 111
- Issue
- 29
- Pages
- 10959-10964
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2030493364
- Cited by
- 93
- References
- 4
- FWCI
- 8.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.