Step-by-Step Synthesis of Non-Noble Metal Electrocatalysts for O2 Reduction under Proton Exchange Membrane Fuel Cell Conditions
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Fe-based catalysts for O 2 reduction under proton exchange membrane fuel cell conditions were prepared on a commercial N234 carbon black support using both a “classical” and a step-by-step procedure to determine if parameters other than microporosity and nitrogen loading of the carbon support are important in the synthesis of Fe/N/C electrocatalysts. The “classical” procedure for obtaining Fe/N/C electrocatalysts is to use a single-step synthesis, in which a carbon support loaded with a metal precursor is heat treated at high temperatures (900−950 °C) in pure NH 3 . In the step-by-step procedure, microporosity is first etched into the carbon support followed, if necessary, by the addition of N-bearing functionalities and, last, the loading of the metal precursor. Similar maximum microporous contents can be etched into N234, using either NH 3 or O 2 (air). However, unlike O 2 (air), etching with NH 3 has the added benefit of creating N-bearing functionalities on the carbon surface. For carbon supports etched in O 2 (air), it is possible to add N-bearing functionalities either by N 2 plasma treatment or by a subsequent, short pyrolysis in NH 3 . In the case of the multistep procedure, a second heat treatment is essential for activating the catalytic sites. This demonstrates the importance of a third factor controlling the activity of the catalysts. The duration and temperature of the activation step depend on the ambient gas used. This activation step, during which a C−N x −Fe complex is transformed into a catalytic site, is unapparent in the “classical” procedure. Both “classical” and step-by-step syntheses yield the same maximum catalytic activity when measured using either the rotating disk electrode method or by fuel cell testing. The similarity in microporous specific area of catalysts made using these two synthesis methods explains this finding.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stabilization of Platinum Oxygen-Reduction Electrocatalysts Using Gold Clusters
Zhang, J., Sasaki, K., Sutter, E., & Adzic, R. R. (2007) · Science · doi:10.1126/science.1134569 · Cited by 1,779
Cited by
Recent advancements in Pt and Pt-free catalysts for oxygen reduction reaction
Nie, Y., Li, L., & Wei, Z. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00484a · Cited by 2,156
Jaouen, F., Proietti, E., Lefèvre, M., Chenitz, R., Dodelet, J.-P., Wu, G., Chung, H. T., Johnston, C. M., & Zelenay, P. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00011f · Cited by 1,588
Self-citationLiu, S., Li, C., Zachman, M. J., Zeng, Y., Yu, H., Li, B., Wang, M., Braaten, J., Liu, J., Meyer, H. M., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01062-1 · Cited by 733
Jaouen, F., Herranz, J., Lefèvre, M., Dodelet, J.-P., Kramm, U. I., Herrmann, I., Bogdanoff, P., Maruyama, J., Nagaoka, T., Garsuch, A., et al. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900219g · Cited by 704
Self-citationLow and non-platinum electrocatalysts for PEMFCs: Current status, challenges and prospects
Brouzgou, A., Song, S. Q., & Tsiakaras, P. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.08.031 · Cited by 380
Metadata
- Authors
- Herranz, J., Lefèvre, M., Larouche, N., Stansfield, B., & Dodelet, J.-P.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-12-01
- Volume
- 111
- Issue
- 51
- Pages
- 19033-19042
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W1967967875
- Cited by
- 61
- References
- 1
- FWCI
- 1.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Step-by-Step Synthesis of Non-Noble Metal Electrocatalysts for O2 Reduction under Proton Exchange Membrane Fuel Cell Conditions. https://app.cochat.ai/papers/10.1021/jp0764438
- The paper
- Herranz, J., Lefèvre, M., Larouche, N., Stansfield, B., & Dodelet, J.-P. (2007). Step-by-Step Synthesis of Non-Noble Metal Electrocatalysts for O2 Reduction under Proton Exchange Membrane Fuel Cell Conditions. The Journal of Physical Chemistry C. https://doi.org/10.1021/jp0764438
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.