The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Synthesis of Mesoporous α-Fe2O3 Nanostructures for Highly Sensitive Gas Sensors and High Capacity Anode Materials in Lithium Ion Batteries
Abstract
Mesoporous α-Fe 2 O 3 materials were prepared in large quantity by the soft template synthesis method using the triblock copolymer surfactant F127 as the template. Nitrogen adsorption−desorption isothermal measurements and transmission electron microscope observation revealed that the as-prepared mesoporous α-Fe 2 O 3 nanostructures have large mesopores in a wide size range of 5−30 nm. It has been found that the Morin transition depends on thermal history of mesoporous α-Fe 2 O 3, which is driven by surface anisotropy. Superparamagnetic behavior of mesoporous α-Fe 2 O 3 is also associated with surface spins with blocking temperature around 50 K. When applied as gas sensors, mesoporous α-Fe 2 O 3 nanostructures exhibited high gas sensitivity toward acetic acid and ethanol gas. As anodes in lithium ion cells, mesoporous α-Fe 2 O 3 materials show a high specific capacity of 1360 mAh/g with excellent cycling stability and high rate capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Cited by
Nanoparticle decoration with surfactants: Molecular interactions, assembly, and applications
Heinz, H., Pramanik, C., Heinz, O., Ding, Y., Mishra, R. K., Marchon, D., Flatt, R. J., Estrela-Lopis, I., Llop, J., Moya, S., et al. (2017) · Surface Science Reports · doi:10.1016/j.surfrep.2017.02.001 · Cited by 608
Guo, S., Wang, H., Yang, W., Fida, H., You, L., & Zhou, K. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.118250 · Cited by 499
Huang, D., Yan, X., Yan, M., Zeng, G., Zhou, C., Wan, J., Cheng, M., & Xue, W. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03620 · Cited by 346
Han, F., Li, D., Li, W., Lei, C., Sun, Q., & Lu, A. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202254 · Cited by 306
Lee, S. C., Jeong, Y., Kim, Y. J., Kim, H., Lee, H. U., Lee, Y.-C., Lee, S. M., Kim, H. J., An, H.-R., Ha, M. G., et al. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.04.048 · Cited by 40
Self-citation
Metadata
- Authors
- Sun, B., Horvat, J., Kim, H. S., Kim, W.-S., Ahn, J., & Wang, G.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-10-15
- Volume
- 114
- Issue
- 44
- Pages
- 18753-18761
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2023882868
- Cited by
- 323
- References
- 1
- FWCI
- 11.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
