The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
NiCo2Alloys: Controllable Synthesis, Magnetic Properties, and Catalytic Applications in Reduction of 4-Nitrophenol
Abstract
Dendritic Ni 33.8 Co 66.2 alloy microstructures with hexagonal closed-packed phase have been prepared in large-scale by a simple and facile solution phase chemical route, while flowerlike Ni 33.4 Co 66.6 in size of 2.5–5.5 μm was synthesized by solvothermal routes. Experimental results show that the reaction temperature, total concentration of [Ni 2+ ] + [Co 2+ ], and kinds of solvent and surfactants are key factors for controlling the morphology and crystal phase of the NiCo alloy. The possible formation mechanism for the Ni 33.8 Co 66.2 dendrites has been discussed. Magnetic measurements revealed that both of the NiCo 2 alloys obtained are ferromagnetic at room temperature. The saturation magnetization value of the Ni 33.8 Co 66.2 dendrites (163.55 emu/g) is lower than that of the flowerlike Ni 33.4 Co 66.6 (195.79 emu/g), but the Ni 33.8 Co 66.2 dendritic structures exhibit an enhanced coercivity value. NiCo 2 alloys with different shapes (Ni 33.8 Co 66.2 dendrites and flowerlike Ni 33.4 Co 66.6 ) have been used as reusable heterogeneous catalysts to reduce 4-nitrophenol (4-NP) into 4-aminophenol (4-AP) by NaBH 4 . The kinetic data indicate that Ni 33.8 Co 66.2 dendrites are catalytically more active than the flowerlike Ni 33.4 Co 66.6 probably due to its larger surface-to-volume ratio and surface areas, since their Brunauer–Emmett–Teller surface areas are 32.68 and 20.66 m 2 /g, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shape control of CdSe nanocrystals
Peng, X., Manna, L., Yang, W., Wickham, J., Scher, E., Kadavanich, A., & Alivisatos, A. P. (2000) · Nature · doi:10.1038/35003535 · Cited by 4,487
Cited by
Reduction of Nitro Compounds Using 3d-Non-Noble Metal Catalysts
Formenti, D., Ferretti, F., Scharnagl, F. K., & Beller, M. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00547 · Cited by 862
Metal organic frameworks as precursors for the manufacture of advanced catalytic materials
Oar-Arteta, L., Wezendonk, T., Sun, X., Kapteijn, F., & Gascon, J. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00007c · Cited by 361
Metadata
- Authors
- Wu, K.-L., Wei, X.-W., Zhou, X.-M., Wu, D.-H., Liu, X.-W., Ye, Y., & Wang, Q.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-08-25
- Volume
- 115
- Issue
- 33
- Pages
- 16268-16274
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2332562628
- Cited by
- 209
- References
- 1
- FWCI
- 6.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: NiCo2Alloys: Controllable Synthesis, Magnetic Properties, and Catalytic Applications in Reduction of 4-Nitrophenol. https://app.cochat.ai/papers/10.1021/jp201660w
- The paper
- Wu, K.-L., Wei, X.-W., Zhou, X.-M., Wu, D.-H., Liu, X.-W., Ye, Y., & Wang, Q. (2011). NiCo2Alloys: Controllable Synthesis, Magnetic Properties, and Catalytic Applications in Reduction of 4-Nitrophenol. The Journal of Physical Chemistry C. https://doi.org/10.1021/jp201660w
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.