Graphene-Supported Pt–Au Alloy Nanoparticles: A Highly Efficient Anode for Direct Formic Acid Fuel Cells
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Graphene-supported Pt and Pt–Au alloy electrocatalysts are prepared by ethylene glycol reduction method and characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). XRD reveals the face-centered cubic structure of Pt in the materials. SEM and TEM images show the good spatial distribution of metal nanoparticles on layered graphene sheets. EDX reveals that the average composition of elements in the Pt–Au alloy catalyst is approximately 1:1. Electrocatalytic performance of the prepared materials toward formic acid oxidation (FAO) is investigated using cyclic voltammetry. FAO activity of the Pt–Au/graphene is found to be ten times higher than that of Pt/graphene. The prepared electrocatalysts are used as anode in a direct formic acid fuel cell and tested at 303 and 333 K. An increase in the performance with increasing temperature is observed. A maximum power density of 185, 70, and 53 mW/cm 2 is observed with Pt–Au/graphene, Pt/graphene, and commercial Pt/C anodes, respectively, at 333 K. The high electrocatalytic performance of Pt–Au/graphene is attributed to the change in the electronic structure of Pt by the presence of alloying element, Au.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oxygen Reduction on Carbon-Supported Pt−Ni and Pt−Co Alloy Catalysts
Paulus, U. A., Wokaun, A., Scherer, G. G., Schmidt, T. J., Stamenkovic, V., Radmilovic, V., Markovic, N. M., & Ross, P. N. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013442l · Cited by 954
Rao, C. V., Reddy, A. L. M., Ishikawa, Y., & Ajayan, P. M. (2011) · Carbon · doi:10.1016/j.carbon.2010.10.056 · Cited by 184
Self-citationVenkateswara Rao, C., & Viswanathan, B. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9041606 · Cited by 96
Cited by
Graphene-Supported Nanoelectrocatalysts for Fuel Cells: Synthesis, Properties, and Applications
Liu, M., Zhang, R., & Chen, W. (2014) · Chemical Reviews · doi:10.1021/cr400523y · Cited by 986
Strongly coupled inorganic–nano-carbon hybrid materials for energy storage
Wang, H., & Dai, H. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35307e · Cited by 876
Graphene based metal and metal oxide nanocomposites: synthesis, properties and their applications
Khan, M., Tahir, M. N., Adil, S. F., Khan, H. U., Siddiqui, M. R. H., Al-warthan, A. A., & Tremel, W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02240a · Cited by 709
Jiang, K., Zhang, H.-X., Zou, S., & Cai, W.-B. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp03151b · Cited by 355
Graphene‐Based Materials for Energy Conversion
Sahoo, N. G., Pan, Y., Li, L., & Chan, S. H. (2012) · Advanced Materials · doi:10.1002/adma.201104971 · Cited by 343
Synthesis and applications of graphene-based noble metal nanostructures
Tan, C., Huang, X., & Zhang, H. (2013) · Materials Today · doi:10.1016/j.mattod.2013.01.021 · Cited by 286
Graphene-based materials with tailored nanostructures for energy conversion and storage
Yang, Y., Han, C., Jiang, B., Iocozzia, J., He, C., Shi, D., Jiang, T., & Lin, Z. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.12.003 · Cited by 273
Zhang, J., Xu, Y., & Zhang, B. (2014) · Chem. Commun. · doi:10.1039/c4cc03282a · Cited by 99
Zhang, H., Lin, D., Xu, G., Zheng, J., Zhang, N., Li, Y., & Chen, B. H. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.12.006 · Cited by 36
Metadata
- Authors
- Venkateswara Rao, C., Cabrera, C. R., & Ishikawa, Y.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-10-19
- Volume
- 115
- Issue
- 44
- Pages
- 21963-21970
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2313465008
- Cited by
- 153
- References
- 3
- FWCI
- 8.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.