Increasing Selective CO2 Adsorption on Amine-Grafted SBA-15 by Increasing Silanol Density
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Two template removal methods were employed to create porosity in mesoporous silica SBA-15: ethanol extraction versus conventional high-temperature calcination. The resulting silicas were subjected to amine (3-aminopropyl) grafting and studied for their CO 2 adsorption properties. The goal was to significantly increase the surface silanol density, and hence the grafted amine loading, leading directly to increased CO 2 adsorption capacity and CO 2 /N 2 selectivity. Thus, the silanol density was increased from 3.4 OH/nm 2 for the calcined SBA-15 to 8.5 OH/nm 2 for the SBA-15 by solvent extraction. Correspondingly, for these two samples, the grafted amine loading was increased from 2.2 to 3.2 mmol/g, and the CO 2 adsorption capacity was increased from 1.05 to 1.6 mmol/g at conditions relevant to CO 2 capture (0.15 bar and 25 °C), or a 52% increase. The CO 2 /N 2 selectivity was increased from 46 to 131. The isosteric heats of adsorption, the sorbent stability during cyclic adsorption–desorption, and the (positive) effects of moisture on CO 2 adsorption were also investigated and compared.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Characterization of the porous structure of sba-15
Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R. (2000) · Chemistry of Materials · doi:10.1021/cm000164e · Cited by 1,409
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Self-citationReducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Cited by
Recent advances in direct air capture by adsorption
Zhu, X., Xie, W., Wu, J., Miao, Y., Xiang, C., Chen, C., Ge, B., Gan, Z., Yang, F., Zhang, M., et al. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00970b · Cited by 456
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Single-Component and Binary CO2 and H2O Adsorption of Amine-Functionalized Cellulose
Gebald, C., Wurzbacher, J. A., Borgschulte, A., Zimmermann, T., & Steinfeld, A. (2014) · Environmental Science & Technology · doi:10.1021/es404430g · Cited by 226
Vilarrasa-García, E., Cecilia, J. A., Bastos-Neto, M., Cavalcante, C. L., Azevedo, D. C. S., & Rodríguez-Castellón, E. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.054 · Cited by 48
Metadata
- Authors
- Wang, L., & Yang, R. T.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-10-10
- Volume
- 115
- Issue
- 43
- Pages
- 21264-21272
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2318590206
- Cited by
- 238
- References
- 4
- FWCI
- 25.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.