The DOI matches its Crossref record.
Characteristics of the Electrical Percolation in Carbon Nanotubes/Polymer Nanocomposites
Abstract
We study the onset of electrical percolation in multiwalled carbon nanotubes (MWNTs)/epoxy nanocomposites. Experiments show a threshold value of 3.2 wt % of MWNTs for percolation to occur. Simulations based on two varied approaches are carried out to evaluate the conductivity characteristics resulting from increasing MWNT content. Simple Monte Carlo simulations in which MWNTs are modeled as either 1D sticks or 2D narrow rectangles dispersed in a 2D simulation volume are shown to yield a percolation threshold in close agreement with experiments. We find that a higher degree of anisotropy in the orientation of nanotubes or of the waviness leads to an increase in the percolation threshold. A more insightful approach encompassing the quantum tunneling effect is also undertaken using the tight-binding simulations. Consideration of the tunneling effect is found to be particularly important when the nanotube aspect ratio is small, the case in which simpler Monte Carlo simulations overestimate the percolation threshold.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrical properties of polymer nanocomposites containing rod-like nanofillers
Mutiso, R. M., & Winey, K. I. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.06.002 · Cited by 288
Zhou, G., Byun, J.-H., Oh, Y., Jung, B.-M., Cha, H.-J., Seong, D.-G., Um, M.-K., Hyun, S., & Chou, T.-W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12448 · Cited by 264
Metadata
- Authors
- Zeng, X., Xu, X., Shenai, P. M., Kovalev, E., Baudot, C., Mathews, N., & Zhao, Y.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-10-13
- Volume
- 115
- Issue
- 44
- Pages
- 21685-21690
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2326910822
- Cited by
- 171
- References
- 0
- FWCI
- 3.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.