The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Facile Controlled Synthesis of Pt/MnO2 Nanostructured Catalysts and Their Catalytic Performance for Oxidative Decomposition of Formaldehyde
Abstract
Pt/MnO 2 nanostructured catalysts with cocoon-, urchin-, and nest-like morphologies were synthesized by a facile method. The synthesized MnO 2 nanostructures and Pt/MnO 2 catalysts were characterized by means of X-ray diffraction (XRD), N 2 adsorption–desorption, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). TEM analyses showed that Pt nanoparticles of 1–4 nm were evenly dispersed on the surface of three MnO 2 nanostructures, and no Pt nanoparticle agglomeration occurred in the Pt/MnO 2 catalysts. These Pt/MnO 2 catalysts showed much higher catalytic activities than the corresponding MnO 2 nanostructures for oxidative decomposition of formaldehyde. Comparison of Pt/MnO 2 catalysts with varied Pt loadings and MnO 2 morphologies revealed that 2 wt % is the optimal Pt loading, and 2 wt % Pt/nest-like MnO 2 showed the highest catalytic activity for oxidative decomposition of formaldehyde (temperature for complete decomposition of HCHO is 70 °C). The high dispersion and small size of Pt nanoparticles and the synergistic effect between the Pt nanoparticle and MnO 2 nanostructure are considered to be the main reasons for the observed high catalytic activity of Pt/nest-like MnO 2 .
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Formaldehyde in the Indoor Environment
Salthammer, T., Mentese, S., & Marutzky, R. (2010) · Chemical Reviews · doi:10.1021/cr800399g · Cited by 1,808
Cited by
He, C., Cheng, J., Zhang, X., Douthwaite, M., Pattisson, S., & Hao, Z. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00408 · Cited by 2,229
Low temperature catalytic oxidation of volatile organic compounds: a review
Huang, H., Xu, Y., Feng, Q., & Leung, D. Y. C. (2015) · Catalysis Science & Technology · doi:10.1039/c4cy01733a · Cited by 770
Bai, B., Arandiyan, H., & Li, J. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.05.056 · Cited by 516
MnO2‐Based Materials for Environmental Applications
Yang, R., Fan, Y., Ye, R., Tang, Y., Cao, X., Yin, Z., & Zeng, Z. (2021) · Advanced Materials · doi:10.1002/adma.202004862 · Cited by 461
Positive Effects of K+ Ions on Three-Dimensional Mesoporous Ag/Co3O4 Catalyst for HCHO Oxidation
Bai, B., & Li, J. (2014) · ACS Catalysis · doi:10.1021/cs5006663 · Cited by 392
Room-Temperature Oxidation of Formaldehyde by Layered Manganese Oxide: Effect of Water
Wang, J., Zhang, P., Li, J., Jiang, C., Yunus, R., & Kim, J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02085 · Cited by 383
Wang, H., Wang, L., Lin, D., Feng, X., Niu, Y., Zhang, B., & Xiao, F.-S. (2021) · Nature Catalysis · doi:10.1038/s41929-021-00611-3 · Cited by 327
Review on noble metal-based catalysts for formaldehyde oxidation at room temperature
Guo, J., Lin, C., Jiang, C., & Zhang, P. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.238 · Cited by 288
Metadata
- Authors
- Yu, X., He, J., Wang, D., Hu, Y., Tian, H., & He, Z.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-12-27
- Volume
- 116
- Issue
- 1
- Pages
- 851-860
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2319464159
- Cited by
- 164
- References
- 1
- FWCI
- 4.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.