The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Solution-Processed Tungsten Oxide as an Effective Anode Buffer Layer for High-Performance Polymer Solar Cells
Abstract
WO 3 is an effective anode buffer layer to substitute PEDOT:PSS in both organic light-emitting diodes and polymer solar cells (PSCs). However, the vacuum deposition of the WO 3 layer is not compatible with low-cost solution-processing technology for the roll-to-roll fabrication of PSCs. Here, we report, for the first time, a solution-processed WO 3 (s-WO 3 ) anode buffer layer that was prepared by spin-coating tungsten(VI) isopropoxide solution on an ITO electrode and then thermal annealing at 150 °C for 10 min in air, for the application in PSCs. The s-WO 3 layer shows a high hole mobility of 9.4 × 10 –3 cm 2 /V·s and high light transmittance. The photovoltaic performance of the buffer layer was investigated by fabricating the PSCs based on poly(3-hexylthiophene) (P3HT) as a donor and (6,6)-phenyl-C 61 -butyric acid methyl ester (PC 60 BM), (6,6)-phenyl-C 71 -butyric acid methyl ester (PC 70 BM), indene-C 60 bisadduct (IC 60 BA), or indene-C 70 bisadduct (IC 70 BA) as an acceptor. The PSCs with the s-WO 3 anode buffer layer show enhanced photovoltaic performance in comparison with the devices with PEDOT:PSS as the anode buffer layer. The power conversion efficiency of the PSC based on P3HT/IC 70 BA with the s-WO 3 anode buffer layer reached 6.36% under the illumination of AM 1.5G, 100 mW/cm 2 . The results indicate that s-WO 3 is a promising solution-processable anode buffer layer material for high-efficiency PSCs and for the fabrication of flexible PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical characteristics and efficiency of single-layer organic light-emitting diodes
Malliaras, G. G., Salem, J. R., Brock, P. J., & Scott, C. (1998) · Physical Review B · doi:10.1103/physrevb.58.r13411 · Cited by 663
Cited by
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Versatile ternary organic solar cells: a critical review
An, Q., Zhang, F., Zhang, J., Tang, W., Deng, Z., & Hu, B. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02641e · Cited by 645
Greiner, M. T., & Lu, Z.-H. (2013) · NPG Asia Materials · doi:10.1038/am.2013.29 · Cited by 444
Rafique, S., Abdullah, S. M., Sulaiman, K., & Iwamoto, M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.12.008 · Cited by 275
Metadata
- Authors
- Tan, Z., Li, L., Cui, C., Ding, Y., Xu, Q., Li, S., Qian, D., & Li, Y.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-08-27
- Volume
- 116
- Issue
- 35
- Pages
- 18626-18632
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2008303221
- Cited by
- 173
- References
- 1
- FWCI
- 14.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.