Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 178

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Reduced Graphene Oxide Paper Electrode: Opposing Effect of Thermal Annealing on Li and Na Cyclability

David, Lamuel, Singh, Gurpreet·2014·The Journal of Physical Chemistry C

Abstract

We study long-term electrochemical sodium and lithium cycling, and tensile testing behavior of thermally reduced graphene oxide (rGO) paper electrodes. We find strong dependence of annealing temperature and gas environment on the electrical conductivity, electrochemical capacity, and rate capability of the electrodes. The effect, however, was opposing for the two cell types. Lithium charge capacity increased with increasing annealing temperatures reaching a stable value of ∼325 mAh·g anode –1 (∼100 mAh·cm –3 anode at ∼48 μA·cm –2 with respect to total volume of the electrode) for specimen annealed at 900 °C, while a sharp decline in Na charge capacity was noted for rGO annealed above 500 °C. Maximum sodium charge capacity of ∼140 mAh·g –1 anode at 100 mA·g –1 anode (∼98 mAh·cm anode –3 at ∼70 μA·cm –2 ) was realized for specimen reduced at 500 °C. These values are the highest reported for GO paper electrodes. More important, annealing of GO in NH 3 environment resulted in a complete shutdown of its Na-ion cyclability showing near-zero charge capacity. On the contrary, NH 3 annealing only improved the electrode’s Li-ion cycling efficiency and rate capability. This behavior is attributed to the increased level of ordering in graphene sheets and decreased interlayer spacing with increasing annealing temperatures in Ar or reduction at moderate temperatures in NH 3 atmosphere. Further, uniaxial tensile tests and videography highlighted the superior elasticity and high strain to failure of crumpled paper electrodes. The present work provides new insights toward the optimization and design of Li and other larger metal-ion battery electrodes where graphene is utilized as an active material, conductive agent, or a flexible mechanical support.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/jp5080847

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 178

Metadata

Authors
David, L., & Singh, G.
Venue
The Journal of Physical Chemistry C
Published
2014-12-01
Volume
118
Issue
49
Pages
28401-28408
ISSN
  • 1932-7447 (ISSN-L)
  • 1932-7455
OpenAlex
W2314316880
Cited by
178
References
1
FWCI
14.33
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.