The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Methylammonium Lead Bromide Perovskite-Based Solar Cells by Vapor-Assisted Deposition
Abstract
The past two years have seen the uniquely rapid emergence of a new class of solar cell based on organic–inorganic halide perovskite. Although less explored than its tri-iodide counterparts, CH 3 NH 3 PbBr 3 has a larger bandgap of 2.3 eV with a higher voltage potential that is suitable for tandem solar cell applications. In this paper, we report a vapor-assisted method for depositing and fully crystallizing CH 3 NH 3 PbBr 3 film on mesoporous TiO 2 with good coverage. CH 3 NH 3 PbBr 3 fabricated using this method has demonstrated long carrier diffusion length (>1 μm) as estimated by transient photoluminescence-quenching measurements. We demonstrate solar cells fabricated using such films and spiro-OMeTAD as the hole transport layer with an averaged (from forward and reverse scans) conversion efficiency of 8.7%, V oc of 1.45 V, J sc of 9.75 mA/cm 2, and fill factor of 61.5%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Brenner, T. M., Egger, D. A., Kronik, L., Hodes, G., & Cahen, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.7 · Cited by 1,557
Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors
Leijtens, T., Bush, K. A., Prasanna, R., & McGehee, M. D. (2018) · Nature Energy · doi:10.1038/s41560-018-0190-4 · Cited by 1,121
Acoustic-optical phonon up-conversion and hot-phonon bottleneck in lead-halide perovskites
Yang, J., Wen, X., Xia, H., Sheng, R., Ma, Q., Kim, J., Tapping, P., Harada, T., Kee, T. W., Huang, F., et al. (2017) · Nature Communications · doi:10.1038/ncomms14120 · Cited by 503
Self-citationImproving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Fang, H.-H., Adjokatse, S., Wei, H., Yang, J., Blake, G. R., Huang, J., Even, J., & Loi, M. A. (2016) · Science Advances · doi:10.1126/sciadv.1600534 · Cited by 369
Metadata
- Authors
- Sheng, R., Ho-Baillie, A., Huang, S., Chen, S., Wen, X., Hao, X., & Green, M. A.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-10
- Volume
- 119
- Issue
- 7
- Pages
- 3545-3549
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2335284473
- Cited by
- 245
- References
- 2
- FWCI
- 21.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
