The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Template-Free Synthesis of Uniform CdS Hollow Nanospheres and Their Photocatalytic Activities
Abstract
A simple and facile template-free method has been developed for the fabrication of CdS hollow nanospheres via hydrothermal treatment of aqueous solutions of cadmium acetate and thiourea. Based on the detailed investigation on the influences of experimental parameters including the precursor chemical concentrations, reaction time, and reaction temperature, the formation mechanism of the hollow interiors by an Ostwald ripening process was the first time proposed for CdS hollow nanospheres. In particular, it was found that molar ratio of thiourea:Cd 2+ in the starting solutions affected the sizes of the nanospheres and the hollowing process. At a high ratio of 25:1, hollow nanospheres with an average diameter of ca. 100 nm were obtained. In the presence of a large excess of thiourea, isotropic growth of CdS nanocrystallites occurred with their domain sizes in [100] and [001] directions similar at ca. 20 nm. At the same time, the hollowing process was promoted because of a fast mass transport. At lower molar ratios at 10:1 and 5:1, hollow interiors were not observed and the diameters of the nanospheres increased to 200 and 280 nm. The nanocrystallites in these larger nanospheres grew preferentially in [001] direction to ca. 40 nm. All the nanospheres formed have a hexagonal wurtzite structure and exhibit good size uniformity and regularity. Furthermore, the as-prepared hollow nanospheres demonstrated a good photocatalytic activity for methylene blue degradation by complete oxidation under visible light.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Single-nanowire electrically driven lasers
Duan, X., Huang, Y., Agarwal, R., & Lieber, C. M. (2003) · Nature · doi:10.1038/nature01353 · Cited by 2,447
Cited by
Cheng, L., Xiang, Q., Liao, Y., & Zhang, H. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03640j · Cited by 1,733
Ayodhya, D., & Veerabhadram, G. (2018) · Materials Today Energy · doi:10.1016/j.mtener.2018.05.007 · Cited by 352
Porous photocatalysts for advanced water purifications
Pan, J. H., Dou, H., Xiong, Z., Xu, C., Ma, J., & Zhao, X. S. (2010) · Journal of Materials Chemistry · doi:10.1039/b925523k · Cited by 337
Gao, P., Liu, J., Sun, D. D., & Ng, W. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.02.003 · Cited by 303
Dutta, A. K., Maji, S. K., & Adhikary, B. (2014) · Materials Research Bulletin · doi:10.1016/j.materresbull.2013.08.024 · Cited by 205
Metadata
- Authors
- Lin, G., Zheng, J., & Xu, R.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-04-17
- Volume
- 112
- Issue
- 19
- Pages
- 7363-7370
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2051231042
- Cited by
- 188
- References
- 1
- FWCI
- 6.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.