The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Examination of Etching Agent and Etching Mechanism on Femotosecond Laser Microfabrication of Channels Inside Vitreous Silica Substrates
Abstract
We examined the physical chemistry underlying a wet chemical etching-assisted femtosecond laser microfabrication technique. Close scrutiny of etching reagents and the etching process has led to further refinement of the method for practical use such as microchips for chemical total analysis systems (μ-TAS). Microchannels as long as a centimeter scale with less than 60 μm diameter (aspect ratio of ∼200) were fabricated inside vitreous silica substrates. In this regard, we demonstrated that a concentrated aqueous solution of KOH is advantageous over commonly used aqueous HF because of least saturation behavior in elongating channel structures. Resultant nearly twice as large the etching selectivity of KOH as that of HF allowed substantial penetration depths within the laser-modified volume while leaving the unmodified regions practically intact. Furthermore, the mechanism of laser-modification that permits highly selective wet etching was investigated by photoluminescence and confocal Raman spectral measurements of the irradiated microvolumes. Based on the experimental results, we propose that the formation of a Si-rich structure is responsible for the remarkably enhanced etching rate of aqueous KOH, in addition to the densificaton of the silica structure previously advocated for the mechanism of waveguide formation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Femtosecond waveguide writing: a new avenue to three-dimensional integrated optics
Nolte, S., Will, M., Burghoff, J., & Tuennermann, A. (2003) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2088-6 · Cited by 545
Cited by
Femtosecond laser three-dimensional micro- and nanofabrication
Sugioka, K., & Cheng, Y. (2014) · Applied Physics Reviews · doi:10.1063/1.4904320 · Cited by 490
Femtosecond laser microstructuring: an enabling tool for optofluidic lab‐on‐chips
Osellame, R., Hoekstra, H. J. W. M., Cerullo, G., & Pollnau, M. (2011) · Laser & Photonics Reviews · doi:10.1002/lpor.201000031 · Cited by 320
Sugioka, K., Xu, J., Wu, D., Hanada, Y., Wang, Z., Cheng, Y., & Midorikawa, K. (2014) · Lab Chip · doi:10.1039/c4lc00548a · Cited by 259
Ultrafast Laser Additive Manufacturing: A Review
Saunders, J., Elbestawi, M., & Fang, Q. (2023) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp7030089 · Cited by 35
Metadata
- Authors
- Kiyama, S., Matsuo, S., Hashimoto, S., & Morihira, Y.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-04-22
- Volume
- 113
- Issue
- 27
- Pages
- 11560-11566
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2017780015
- Cited by
- 208
- References
- 1
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Examination of Etching Agent and Etching Mechanism on Femotosecond Laser Microfabrication of Channels Inside Vitreous Silica Substrates. https://app.cochat.ai/papers/10.1021/jp900915r
- The paper
- Kiyama, S., Matsuo, S., Hashimoto, S., & Morihira, Y. (2009). Examination of Etching Agent and Etching Mechanism on Femotosecond Laser Microfabrication of Channels Inside Vitreous Silica Substrates. The Journal of Physical Chemistry C. https://doi.org/10.1021/jp900915r
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.