The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Spectroscopic Investigation of the Anatase-to-Rutile Transformation of Sol−Gel-Synthesized TiO2 Photocatalysts
Abstract
Among the three major phases in titania, anatase is reported to be a better photocatalytically active phase. Anatase to rutile transformations, under normal conditions, usually occurs at a temperatue range of 600−700 °C. Various chemical additives have previously been employed to extend the anatase transition to higher temperatures. The effect of employing various concentrations of formic acid and water on phase transition has systematically been studied by XRD, FTIR, and Raman spectroscopy. A considerably higher anatase phase (41%) has been obtained at 800 °C, and 10% anatase composition is retained after annealing the materials at 900 °C for the optimized composition. On comparison, a control sample which has been prepared without formic acid showed that the rutile phase formed at a temperature of 600 °C, FTIR and Raman studies indicated that the formate group favored a bridging (syn−anti or syn−syn) mode of chelation depending on the reaction conditions. It has been concluded that the resulting syn−anti binding hinders cross-linking of the gel network, resulting in a weakened structure and thus causing the anatase to rutile transformation temperature to occur at a lower temperature than with the syn−syn mode of binding where more ordered gel networks are formed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The surface science of titanium dioxide
Diebold, U. (2003) · Surface Science Reports · doi:10.1016/s0167-5729(02)00100-0 · Cited by 7,944
Explaining the Enhanced Photocatalytic Activity of Degussa P25 Mixed-Phase TiO 2 Using EPR
Hurum, D. C., Agrios, A. G., Gray, K. A., Rajh, T., & Thurnauer, M. C. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp0273934 · Cited by 2,015
Cited by
A review on the visible light active titanium dioxide photocatalysts for environmental applications
Pelaez, M., Nolan, N. T., Pillai, S. C., Seery, M. K., Falaras, P., Kontos, A. G., Dunlop, P. S. M., Hamilton, J. W. J., Byrne, J. A., O'Shea, K., et al. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.05.036 · Cited by 4,047
Self-citationVisible-light activation of TiO2 photocatalysts: Advances in theory and experiments
Etacheri, V., Di Valentin, C., Schneider, J., Bahnemann, D., & Pillai, S. C. (2015) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2015.08.003 · Cited by 1,475
Self-citationRecent advances in photocatalysis for environmental applications
Byrne, C., Subramanian, G., & Pillai, S. C. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.07.080 · Cited by 820
Self-citationYe, J., Liu, W., Cai, J., Chen, S., Zhao, X., Zhou, H., & Qi, L. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108205q · Cited by 626
Tsang, C. H. A., Li, K., Zeng, Y., Zhao, W., Zhang, T., Zhan, Y., Xie, R., Leung, D. Y. C., & Huang, H. (2019) · Environment International · doi:10.1016/j.envint.2019.01.015 · Cited by 308
Metadata
- Authors
- Nolan, N. T., Seery, M. K., & Pillai, S. C.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-14
- Volume
- 113
- Issue
- 36
- Pages
- 16151-16157
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2026488792
- Cited by
- 250
- References
- 2
- FWCI
- 3.27
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.