The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Improving the Reproducibility of P3HT:PCBM Solar Cells by Controlling the PCBM/Cathode Interface
Abstract
Plastic photovoltaic devices offer a real potential for making solar energy economically viable. Unfortunately, bulk heterojunction (BHJ) solar cells fabricated from blends of the commonly used materials poly(3-hexylthiophene), P3HT, and phenyl-C 61 -butyric acid methyl ester, PCBM, sometimes exhibit low efficiencies even when the procedures followed often produce solar cells with efficiencies exceeding 5%. In this Letter, we show that this irreproducibility is caused by subtleties in the film processing conditions that ultimately lead to poor electron extraction from the devices. For low-performing devices, photogeneration and charge extraction with a linearly increasing voltage ramp (photo−CELIV) measurements show an order-of-magnitude difference in the effective mobilities of the electrons and holes. Atomic force microscopy (AFM) experiments reveal that the top surface of these low-performing devices is nearly pure P3HT. We argue that small variations in the solvent evaporation kinetics during spin-coating of the BHJ active layer, which are difficult to control, cause PCBM to segregate toward the bottom of the P3HT film to different extents, explaining why electron extraction from the PCBM component of the BHJ is so difficult in poorly performing devices. Finally, we show that electron extraction can be greatly improved by spin-coating a thin PCBM layer on top of the BHJ before deposition of the cathode, allowing the reproducible fabrication of high-efficiency polymer solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Conjugated Polymer-Based Organic Solar Cells
Günes, S., Neugebauer, H., & Sariciftci, N. S. (2007) · Chemical Reviews · doi:10.1021/cr050149z · Cited by 6,279
Cited by
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
Zhang, G., Zhao, J., Chow, P. C. Y., Jiang, K., Zhang, J., Zhu, Z., Zhang, J., Huang, F., & Yan, H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00535 · Cited by 1,661
Fill factor in organic solar cells
Qi, B., & Wang, J. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51383a · Cited by 732
The role of buffer layers in polymer solar cells
Po, R., Carbonera, C., Bernardi, A., & Camaioni, N. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00273a · Cited by 480
Metadata
- Authors
- Tremolet de Villers, B., Tassone, C. J., Tolbert, S. H., & Schwartz, B. J.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-10-13
- Volume
- 113
- Issue
- 44
- Pages
- 18978-18982
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2048321635
- Cited by
- 163
- References
- 1
- FWCI
- 12.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improving the Reproducibility of P3HT:PCBM Solar Cells by Controlling the PCBM/Cathode Interface. https://app.cochat.ai/papers/10.1021/jp9082163
- The paper
- Tremolet de Villers, B., Tassone, C. J., Tolbert, S. H., & Schwartz, B. J. (2009). Improving the Reproducibility of P3HT:PCBM Solar Cells by Controlling the PCBM/Cathode Interface. The Journal of Physical Chemistry C. https://doi.org/10.1021/jp9082163
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.