The DOI matches its Crossref record.
Carbon-Deposited TiO2: Synthesis, Characterization, and Visible Photocatalytic Performance
Abstract
Carbon-deposited TiO 2 (TiO 2 @C) was prepared with a one-pot hydrothermal process by using glucose as a carbon source. The physical properties of TiO 2 @C were studied by XRD, TG-DTA, HRTEM, and UV−vis diffuse reflectance spectra (DRS), while the chemical states of carbon were discussed via X-ray photoelectron spectroscopy (XPS). A graphite carbon layer was formed out of the TiO 2 grain during the hydrothermal process via the dehydration of glucose, which consisted of not only C n but also C—OH (and C—O—C) and C═O (and COO). TiO 2 @C has remarkable light absorption in the visible region. It was found that the photocatalytic activity of TiO 2 @C was greatly enhanced compared to noncarbon-TiO 2 under visible irradiation. The photocatalyst with the highest photocatalytic activity for the degradation of Acid Orange 7 (AO7) was G15 TiO 2 @C, while that for the degradation of 2,4-dichlorophenol (2,4-DCP) was G5 TiO 2 @C. Two kinds of sensitization processes, carbon sensitization and dye sensitization, are responsible for the visible light-induced photocatalysis of TiO 2 @C. Carbon sensitization reached its optimal condition in G5, while dye sensitization occurred in its maximum efficiency in G15.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbonaceous nanomaterials for the enhancement of TiO2 photocatalysis
Leary, R., & Westwood, A. (2011) · Carbon · doi:10.1016/j.carbon.2010.10.010 · Cited by 1,202
Surface modification of TiO2 photocatalyst for environmental applications
Park, H., Park, Y., Kim, W., & Choi, W. (2013) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.10.001 · Cited by 1,034
A survey of photocatalytic materials for environmental remediation
Di Paola, A., García-López, E., Marcì, G., & Palmisano, L. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.11.050 · Cited by 931
Titirici, M.-M., White, R. J., Falco, C., & Sevilla, M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21166a · Cited by 921
Kapilashrami, M., Zhang, Y., Liu, Y.-S., Hagfeldt, A., & Guo, J. (2014) · Chemical Reviews · doi:10.1021/cr5000893 · Cited by 508
Mesoporous Anatase Titania Hollow Nanostructures though Silica‐Protected Calcination
Joo, J. B., Zhang, Q., Lee, I., Dahl, M., Zaera, F., & Yin, Y. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101927 · Cited by 433
Enhancement of the Visible-Light Photocatalytic Activity of In2O3–TiO2 Nanofiber Heteroarchitectures
Mu, J., Chen, B., Zhang, M., Guo, Z., Zhang, P., Zhang, Z., Sun, Y., Shao, C., & Liu, Y. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201499r · Cited by 350
Self-doped Ti 3+ -enhanced TiO 2 nanoparticles with a high-performance photocatalysis
Xing, M., Fang, W., Nasir, M., Ma, Y., Zhang, J., & Anpo, M. (2013) · Journal of Catalysis · doi:10.1016/j.jcat.2012.10.014 · Cited by 309
Self-citationControl of the nanoscale crystallinity in mesoporous TiO2shells for enhanced photocatalytic activity
Joo, J. B., Zhang, Q., Dahl, M., Lee, I., Goebl, J., Zaera, F., & Yin, Y. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02533c · Cited by 297
Review of the progress in preparing nano TiO2: An important environmental engineering material
Wang, Y., He, Y., Lai, Q., & Fan, M. (2014) · Journal of Environmental Sciences · doi:10.1016/j.jes.2014.09.023 · Cited by 278
Yang, W., Ma, G., Fu, Y., Peng, K., Yang, H., Zhan, X., Yang, W., Wang, L., & Hou, H. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132381 · Cited by 261
Metadata
- Authors
- Zhong, J., Chen, F., & Zhang, J.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-12-16
- Volume
- 114
- Issue
- 2
- Pages
- 933-939
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2067929451
- Cited by
- 237
- References
- 0
- FWCI
- 7.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.