The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Oxidation Rate Effect on the Direction of Metal-Assisted Chemical and Electrochemical Etching of Silicon
Abstract
Assisted by noble metal particles, non-(100) Si substrates were etched in solutions with different oxidant concentrations at different temperatures. The etching directions of (110) and (111) Si substrates are found to be influenced by the concentration of oxidant in etching solutions. In solutions with low oxidant concentration, the etching proceeds along the crystallographically preferred ⟨100⟩ directions, whereas the etching occurs along the vertical direction relative to the surface of the substrate in solutions with high oxidant concentration. These phenomena are found for both n - and p -type substrates as well as in experiments with different oxidants. The experiments on metal-assisted chemical etching are complemented by additional experiments on metal-assisted electrochemical etching of (111) Si substrates with different current densities. As a function of current density, a change of etching directions is observed. This shows that the change of the etching directions is mainly driven by the oxidation rate. On the basis of these phenomena, we have demonstrated fabrication of Si nanopores with modulated orientations by periodically etching a (111) substrate in solutions of low and high oxidant concentrations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhanced thermoelectric performance of rough silicon nanowires
Hochbaum, A. I., Chen, R., Delgado, R. D., Liang, W., Garnett, E. C., Najarian, M., Majumdar, A., & Yang, P. (2008) · Nature · doi:10.1038/nature06381 · Cited by 4,109
Cited by
Metal‐Assisted Chemical Etching of Silicon: A Review: In memory of Prof. Ulrich Gösele
Huang, Z., Geyer, N., Werner, P., de Boor, J., & Gösele, U. (2011) · Advanced Materials · doi:10.1002/adma.201001784 · Cited by 1,909
Self-citationMetal-assisted chemical etching of silicon and nanotechnology applications
Han, H., Huang, Z., & Lee, W. (2014) · Nano Today · doi:10.1016/j.nantod.2014.04.013 · Cited by 460
Self-citationLi, X. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2011.11.002 · Cited by 426
Metadata
- Authors
- Huang, Z., Shimizu, T., Senz, S., Zhang, Z., Geyer, N., & Gösele, U.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-05-27
- Volume
- 114
- Issue
- 24
- Pages
- 10683-10690
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W1972968696
- Cited by
- 159
- References
- 1
- FWCI
- 4.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.